Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Not getting vlan DHCP
I have a Dell 5524 I'm trying to set up with multiple vlans. I have vlan 200-400 both on the router and switch. Port 24 is set to tagged (trunk) and it goes to a tagged port on my router, same vlan ID's are on both devices.
I have the PVID set to the Vlan ID, and on the trunk port, have the PVID set to 1. But I'm not getting a DHCP address across the trunk.
What am I missing??
DELL-Josh Cr
Community Manager
•
9733 Posts
•
44221 Points
3065
0
Posted March 15th, 2019 10:00
Hi,
Try setting the port to general mode instead of trunk mode.
DELL-Josh Cr
Community Manager
•
9733 Posts
•
44221 Points
3057
0
Posted March 15th, 2019 11:00
What is getting the 169 address? Set a static ip and see what it can ping.
DELL-Josh Cr
Community Manager
•
9733 Posts
•
44221 Points
3044
0
Posted March 15th, 2019 12:00
Page 207 talks about dhcp https://downloads.dell.com/manuals/common/powerconnect-5500-series_ug_en-us.pdf
SteveG144
9 Posts
3061
0
Posted March 15th, 2019 10:00
I switched the port going from the switch (that was in trunk mode) going to the tagged port on the router, to general mode.
Still getting a 169.x.x.x address