OID 1.3.6.1.2.1.17.7.1.2 (dot1qTpFdbPort)

This will give you the "show bridge address-table".

Here's an example of something you might see:

OID Value
dot1qTpFdbPort.391.0.15.31.33.109.17 2


Take the OID after 391 and that's the MAC address...it just needs to be converted.

The value is the port the MAC address is on.

Message Edited by Mithrilhall on 11-06-2006 10:35 AM

Message Edited by Mithrilhall on 11-06-2006 10:36 AM

I believe this is it....



.1.3.6.1.2.1.17.7.1.2.2.1.2

Hmmm, well that certainly does show the MAC addresses eventually. It also shows all kinds of other info.

The dynamic addresses seem to start at .1.3.6.1.2.1.17.4.3.1.1.0.

How do I find the port associated with the MAC address?

Interesting. Thank you.
I found that using snmpwalk in Linux on the OID .1.3.6.1.2.1.17.4.3.1.1 returns all the MACS in the database (in hex) but no ports.

Message Edited by JPLaflamme on 11-06-2006 11:13 AM

Let me try it from my linux laptop and see what I get.

I get inconsistent results on a 3448 using 1.3.6.1.2.1.17.7.1.2. Mostly timeouts for some reason. After trying and failing on 1.3.6.1.2.1.17.7.1.2 it also causes timeouts on .1.3.6.1.2.1.17.4.3.1.1. Weird. I plan on updating the firmware. Maybe that will fix something.

I guess when I see "INTEGER: 3" that means port 1/G1?

Seems to work much better/faster on the 3348 than the 3448

Message Edited by JPLaflamme on 11-06-2006 11:56 AM

Doh!

I thought you had posted 3348. Let me check what I have for 3448.

Hmmm, I'm not sure that .1.3.6.1.2.1.17.7.1.2 is showing me the right stuff on a powerconnect 3448

Sorry, I have both and will be needing to do this for both.

Works for me on both 33XX, 34XX and 6024X switches.