UNSOLVED
Vlan stacking example
can anyone share a configuration example of an OS 9 switch (S2048-ON) doing vlan stacking? My provider is sending me a stacked traffic stream at one end but the other end is just an ordinary layer 2 trunk. At that other end I have untagged traffic and one vlan (2000) I desperately need to communicate on. I'm not so concerned about the untagged traffic but if that was all I could get working that would do.
Its a service that is being migrated (from another org) to a new location (me) and the new location is seeing the original traffic wrapped in vlan 1234. I have tried reading the config guide and I can make a port stack compatible but I don't understand how I declare one vlan as the wrapper and others as the inside customer vlan. I want to bring the inside vlan 2000 out onto the switch and give it normal vlan functions like an IP address
0
0
Posted May 24th, 2024 15:48
Hello,
To better assist you; Could you verify the switch model?
I am not seeing a S2048-ON.
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!0
0
Posted May 24th, 2024 23:43
OH! I was only half awake :) its an S4048-ON
YL4-DC-CSW#sho ver
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(2.7)
Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved.
Build Time: Tue Jun 23 09:25:55 2020
Build Path: /build/build02/SW/SRC
Dell EMC Networking OS uptime is 40 week(s), 5 day(s), 4 hour(s), 23 minute(s)System image file is "system://A"
System Type: S4048-ON
Control Processor: Intel Rangeley with 2 Gbytes (2127560704 bytes) of memory, core(s) 2.8G bytes of boot flash memory.
2 54-port TE/FG (SK-ON)
96 Ten GigabitEthernet/IEEE 802.3 interface(s)
12 Forty GigabitEthernet/IEEE 802.3 interface(s)0
0
Posted May 27th, 2024 04:54
Hi,
Does this fit your description? https://dell.to/4aRJ3iV
Hopefully this helps. If it doesn't, I do recommend contacting the sales department for a 1 time deployment service to better configure the network to your needs.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.
Ian.J.C
1 Rookie
•
4 Posts
•
2 Points
0
0
Posted May 24th, 2024 10:46
Frame 4917: 98 bytes on wire (784 bits), 98 bytes captured (784 bits)
Ethernet II, Src: Routerbo_93:32:15 (dc:2c:6e:93:32:15), Dst: Routerbo_10:b3:86 (e4:8d:8c:10:b3:86)
Destination: Routerbo_10:b3:86 (e4:8d:8c:10:b3:86)
Source: Routerbo_93:32:15 (dc:2c:6e:93:32:15)
Type: 802.1Q Virtual LAN (0x8100)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 1234
000. .... .... .... = Priority: Best Effort (default) (0)
...0 .... .... .... = DEI: Ineligible
.... 0100 1101 0010 = ID: 1234
Type: 802.1Q Virtual LAN (0x8100)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 2000
000. .... .... .... = Priority: Best Effort (default) (0)
...0 .... .... .... = DEI: Ineligible
.... 0111 1101 0000 = ID: 2000
Type: IPv4 (0x0800)
Internet Protocol Version 4, Src: 103.131.232.141 (103.131.232.141), Dst: ec2-184-72-36-250.us-west-1.compute.amazonaws.com (184.72.36.250)
User Datagram Protocol, Src Port: 16487, Dst Port: 32100
Data (48 bytes)