UNSOLVED

tattomama

updated

22 years ago

T

tattomama

1 Message

0

6221

June 17th, 2004 23:00

installing 2300 wireless

I have hooked all the cables according to the diagrams, and still it cannot find the router.  I plugged the ethernet cable from the modem to the router and then the router to the computer.  Putting it in the ethernet slot in the computer. Any pearls of wisdom?
  • jplee3

    3 Posts

    111

    0

    Posted June 18th, 2004 02:00

    1) Between the cable modem and 2300 router, you should be plugged into the "WAN" port on the router(the isolated port)
    2) You should have a cable plugged-in to port 1,2,3 OR 4 and the other end going to the ethernet card on your computer
    3) Your computer should be setup for "DHCP" and not a "static IP" - what operating system are you running?
    - if you have everything physically plugged in, you should at least have a connection to the router: try typing in http://192.168.2.1 to see if you can get to the setup page. username & password are both "admin"

    - let us know what the progress is!
  • johnallg

    2 Intern

    •

    7280 Posts

    111

    0

    Posted June 21st, 2004 20:00

    On the 2300, the WAN port is called the Internet port.  After connecting the 2300 to your cable modem, power the cable modem off, wait a minute, repower it and let it connect to your ISP, then try the 2300 again.
  • priku

    30 Posts

    111

    0

    Posted June 21st, 2004 21:00

    And..that software which comes with the tm 2300 router has a bug, hence, it is better to OT RUN it on any of the systems, because it might not find the internet connection / the router. We can configure the router depending on the ISP, manually, without running the CD.