Hi. I just updated my Intel PROSet/Wireless 2200BG software using R114280.EXE from the Dell download site. Everything appeared OK during the update and I do have wireless connectivity, but when I open the PROSet/Wireless control panel, I get a message stating that my current drivers (9.0.0.6) aren't compatible with the current (updated) software version 10.1.0.0. It says I should upgrade to version 9.03X:9.02X. Anyone else with this issue? Anyone have a fix for this or know where I can find the required drivers?
If Dell posted this update, why weren't the correct drivers packaged with the new software?
Thanks Jerry. I was there before I posted this message, but didn't want to reinvent the wheel. After reviewing the release notes, it appears I can extract the drivers from the 45 meg package and just install them. That is what I was looking for.
Update:
I was able to update the drivers to version 9.0.2.31 - July 2005 and the driver conflict message no longer appears when the PROSet/Wireless 2200BG control panel is opened. BTW, the Intel software (other than the drivers) is OLDER than the Dell provided software.
I was able to update the drivers to version 9.0.2.31 - July 2005 and the driver conflict message no longer appears when the PROSet/Wireless 2200BG control panel is opened. BTW, the Intel software (other than the drivers) is OLDER than the Dell provided software.
Thanks for the update. I drilled into the Dell files and found the standalone driver update utility and launched it. It installed the drivers and they are as you said, 9.0.3.9, but with a date of 12-Sep-05. It appears the driver update failed when I ran the Dell PROSet update. The newer version of the PROSet software was installed, but the matching drivers weren't. All is well now.
Hey all ,, matthew here with a lat 610 and fine 2200Bg wireless,,til last week ... As an acrobat reader update began downloading itself against my will ,, my computer froze ,, I shut down ,, rebooted ,, and then my wireless was gone ,, no supported adapters !!! I have found and loaded several versions of the adapter and driver .. Talked to Dell yesterday ,, and they had me load the old Intel driver version 9.0.2.1, 9.0.2.31 11-10-05,, since Dell hasn't yet caught up to Intel Updates ... Still it mattered not to my computer ... No matter which program I use ,,, the intel icon only loads briefly and then disappears,,, The Driver and Adapter won't appear in In device manager but sometimes shows in the add/remove programs... Btw I removed all other cookies , temp files ,, prefetches and any intel wireless residual files ... I Defragged ,, Ran Adaware ,, SpyBot and Stinger in safe mode ... I have Hijack this and use it in very careful relative ignorance ,, and was wondering if anyone could read my computers chart and recognize a conflict ... Need a miracle , soon, or I'll just save my harddrive to dvd's and reformat ... Any saviours out there ,, please help ,Thank you ,, matthew
deepest_purple_420@yahoo.comwww.myspace.com/templeofawareness
Jerry Park
695 Posts
781
0
Posted December 22nd, 2005 21:00
http://www.intel.com/support/wireless/wlan/sb/cs-010623.htm