Hello again! Seems like it's been forever since I've been here last. I was given a 3050 Micro from a clean out, so I am going to attempt to get it working again. Since I am not familiar with these, I have a few questions:
1. How high can I take the processor? The manual says i5-7500T, but I read that it can possibly take an i7-7700T. Will also max out the RAM at 32GB DDR4-2400.
2. Can I have both a SATA SSD and an NVMe SSD installed at the same time? Would like to try and boot from the NVMe, preferably.
3. What are the Dell Part numbers for the Wireless LAN and VGA extension module? I have some old monitors I would like to try and hook up to it.
@redxps630 you are amazing. I'm getting the parts now. Also, is there a separate part number for the antenna assembly? The part numbers you provided seem to only include the wi-fi card by itself.
@redxps630 awesomeness! I will update when I get the parts in. Pictured is the victim patient, as I got it, with the top cover and drive caddy removed.
@realivanjx I haven't ordered the processor yet, but I will very soon.
I got the memory and SSD in today. I put a test drive in to verify that it works. I initially got an error code (2,7) but a quick reseat of the memory fixed it. I also updated the BIOS - It was at 1.5.4! Now has 1.26.0. I also ordered the Wifi card, antenna assembly, and VGA module. Should be in by mid next week.
Once everything is done, it will have a similar performance to my Optiplex 9020 USFF.
redxps630
11 Legend
•
16317 Posts
•
82847 Points
0
0
Posted November 12th, 2023 00:05
Yes to i7-7700T
yes to both Sata and nvme ssd installed. Choose one as boot drive.