I need to install an ASUS 1660Ti GPU and unfortunately the motherboard cannot supply the GPU adequately and the built-in power supply does not have a PCIe cable so I can feed the GPU.
I need to replace the current 260W power supply, with a higher power one that also has a 8 pin PCIe cable in order to power up the GPU.
I need the new power supply to fit in the Optiplex 5060 MT chassis though.
Any suggestion is welcome and thank you for your interest.
nice you said MT. now we know what it is. the ATX spec, supplies are come in lengths from 140mm to way longer and (for higher watts for sure) and hit some things in most PC, not full sized Towers but yeah , Fit and Hits is first. what you should say is what PSU you want or just state the wattage . but I just looked at your case and it as NON ATX shape PSU. no standard. fit. so are you saying to move it outside? using the posted here many times adaptor (100s of times) but oddly there is a stamped , punch out plate just the right of PSU rear. ( id check out this first very carefully) this forum engine hates, IE11, mangles all text.... but here goes... the PSU connectors 4 and 8 pin are not ATX spec, they are HP, spec, only. and we have adaptors. far as I know dell never publishes parts lists, like HP does so well (hp parts surfer , rules) this makes it hard to find all PSU that fit this PC. (and I see none or on ebay to look at) my 3020 uses an non standard Standby power feed too, 12vdc not 5vdc ATX spec, the adaptor cable cures that too. I'm sorry I can do the what really DELL PSU';s fit here, larger watts. (id go 700watts) Corsair or fancy DSP. see this page for adapter PSU http://pcdied.com/intel-magic/Dell/3020/3020.html see photo below of , funny PSU punch out , I think (cant look close me) seen in next post, this edit now has no add photo (IE11 horrors)
Anyone ever figure out if a nice big PSU can be fitted into an Optiplex 5060 MiniTower.
I am buying an EVGA 1050ti tonight in prep for this machine showing up Monday. Even though it supposedly only draws 75w, I too want to make sure the machine is not overloaded. Adapters are very easy to find to make a given PSU work on a given Motherboard. The ENTIRE point of getting this specific graphics card
What PSU do I need to get to supply about 500W or more that fits this case?
I ran out of editing time before noticing I never finished this sentence in my post. Here is the rest of it: "The ENTIRE point of getting this specific graphics card...is to run either FlightGear Flight Simulator OR Microsoft's NEWEST Flight Simulator Deluxe Premium ( haven't downloaded it yet, as it is a bloom'n 128GB - no go on my pathetic little 4Mbps connection). I'm hoping the i5 8500 with at least 16GB ram will run it and a 4GB vid card."
I don't know yet how much Flight Sim can run locally, and not be dependent on Internet bandwidth. If there are any helpful suggestions on configuring this machine for its intended purpose, I am ALL EARS. I am disappointed in to learn there simply IS NOT an aftermarket PSU that fits this case. Darnit. That's largely the point I went with a "tower", albeit a mini tower to have next to the couch in the livingroom ONLY to play Flight Sim on the TV.
Any better ides to go about what I'm after than how I'm doing it, please advise.
savvy2
4 Apprentice
•
2547 Posts
6474
0
Posted July 30th, 2019 06:00
ah 2nd post allows adding photos, how odd
check out this odd punch plate? I wonder what that does? may allow wider dell PSU with more watts. IDK