Jgraichen,

Would you do me a favor and confirm a couple things for me?

Is this occuring on multiple platforms, or the same model devices?

What models is this affecting?

Is the rest of the host server also up to date as well?

Have you attempted any form of backflashing to get to the previous version, in order to see if it works again? If so what version did you try?

Laslty, if you like I can try submitting the issue withthe firmware, but would need a svc tag to do so, if you like you can private message me a svc tag and I can submit it on your behalf. 

Let me know.

Hi,

Would like to share that we're seeing the same behavior.

Servers are RPowerEdge R6515 with Dual 10G NIC - iDRAC shows them as "Broadcom Adv. Dual 10Gb Ethernet" 

Family Firmware Version 22.31.13.70

linux detects them as: "Broadcom BCM57412 NetXtreme-E 10Gb Etherne"

Error messages similar as mentioned by @jgraichen 

===

kernel: bnxt_en 0000:41:00.0 ens3f0np0: hwrm req_type 0xa1 seq id 0x23c error 0xffff
kernel: bnxt_en 0000:41:00.0 ens3f0np0: hwrm_tunnel_dst_port_alloc failed. rc:-95
kernel: bnxt_en 0000:41:00.1 ens3f1np1: hwrm req_type 0xa1 seq id 0x23c error 0xffff
kernel: bnxt_en 0000:41:00.1 ens3f1np1: hwrm_tunnel_dst_port_alloc failed. rc:-95

Any expected update on this, that does not involve disabling offloading?

@DELL-Chris H 

All servers have latest firmware applied for all components. And would prefer not downgrade firmware as this in my previus experiences generated lots of problems and didn't work.. Any tips on how to do it if we should try it again?

And how can/should i privately send you a svctag fo rise this issue to firmware team?

Thanks

should add that we're also seeing it on R6525 (dual EPYC) servers, with two dual 10G NICs, The NICs have the same firmware version (latest available on lifecycle/update)

----

kernel: bnxt_en 0000:02:00.0 eth0: Broadcom BCM57416 NetXtreme-E 10GBase-T Ethernet found at mem e1210000, node addr ---
kernel: bnxt_en 0000:41:00.0 eth2: Broadcom BCM57412 NetXtreme-E 10Gb Ethernet found at mem 90210000, node addr ---
....
kernel: bnxt_en 0000:02:00.0 ens1f0np0: hwrm req_type 0xa1 seq id 0x1f7 error 0x3
kernel: bnxt_en 0000:02:00.0 ens1f0np0: hwrm_tunnel_dst_port_alloc failed. rc:-13
kernel: bnxt_en 0000:02:00.1 ens1f1np1: hwrm req_type 0xa1 seq id 0x1f9 error 0x3
kernel: bnxt_en 0000:02:00.1 ens1f1np1: hwrm_tunnel_dst_port_alloc failed. rc:-13
kernel: bnxt_en 0000:41:00.0 ens3f0np0: hwrm req_type 0xa1 seq id 0x1f6 error 0xffff
kernel: bnxt_en 0000:41:00.0 ens3f0np0: hwrm_tunnel_dst_port_alloc failed. rc:-95
kernel: bnxt_en 0000:41:00.1 ens3f1np1: hwrm req_type 0xa1 seq id 0x1f7 error 0xffff
kernel: bnxt_en 0000:41:00.1 ens3f1np1: hwrm_tunnel_dst_port_alloc failed. rc:-95

Hello, you can click on Chris' ID on his post and you will see as attached on your right.

In the meantime, what is the BIOS version on the server and the connected end device name?

Hi @DELL-Young E  

Thanks for the tip on how to direct message.

As for the info requested, here you go:

BIOS Version: 2.10.2
iDRAC Firmware Version: 6.10.30.00

Linux kernel is: 5.4.66-flatcar (Flatcar Linux)

Not sure what you mean with "connected end device name". Servers are connected to Cisco Nexus 9k  switches, if that is what you mean.

thanks

Hello, 

Linux detects them as: "Broadcom BCM57412 NetXtreme-E 10Gb Ethernet"    >>> BCM57412 (10Gb SFP+)

https://dell.to/3m1ImjD

This is the exact module used in the server.

Hello,

We are facing the same issue with "BCM57412 NetXtreme-E 10Gb RDMA Ethernet Controller"
ubuntu server 22.04.1 
PowerEdge C6520
22.31.13.70

@DELL-Chris H  wrote: Is this occuring on multiple platforms, or the same model devices? What models is this affecting? Is the rest of the host server also up to date as well? Have you attempted any form of backflashing to get to the previous version, in order to see if it works again? If so what version did you try?

Hello,mobileye.storage

Thanks for choosing Dell. Have you tried what Chris said earlier in the thread? Also you can PM me for your service tag as well. Wish you a good one.

Hello Young E

We see this on DELL C6520 - Broadcom Adv. Dual 10Gb Ethernet, BCM57412 NetXtreme-E 10Gb
Everything else is up to date.

We backlashed FW from 22.31.13.70 to 22.21.07.80 and everything is working now.