UNSOLVED
PM Memory test
I have just installed a number of Dimms on a blank system and used the memory tester on the utility parition. Dimm 3 failed on a ECC message I have removed the Dimm and ensured I have optimised configuration of dimms. But PM Memory check wont start as it fails on EVlog telling me that I have previously failed and I need to clear the Event log. I cant find how to clear the log to check the remaining dimms? How is this done????
thanks
Leigh
- There are several ways to clear the ESM logs. You can use DSET within the OS. http://support.dell.com/dset. Install the application; no need to create a report at the end. Once installed, in the start menu, you will find DSET, and 'Clear ESM logs'.
If you see a ctrl+e during the end of POST, go into it and there will be a 'system event logs' and then an option to clear. I am not positive that this server has that option though.
Lastly, there is Server Administrator. If you have it installed, there will be a logs tab at the top and then an option to clear.
leigh_b
2 Posts
205
0
Posted August 24th, 2007 13:00