Hello,

These are the Enablement kit and GPU part numbers I see:

You would then install the GPU in Riser 2

Make sure you are Updated to the latest BIOS, iDRAC

1100W or greater PSU are typically recommended when using GPU

@DELL-Charles R​ Thank you for your reply. Does my current riser (Riser 2) support a full-height GPU?

Hi, not unless your system already has the Dell GPU Enablement Kit (470‑BBWW), because the required GPU‑capable riser is included only in that kit.

Thank you for the clarification.

I just want to double-check one detail to make sure I fully understand before placing the order.

When I use the Dell Solution Configurator:

• If I select Riser Configuration 2A, the NVIDIA L4 option does not appear.

• When I select Riser Configuration 3A (L4 GPU), then the L4 becomes selectable.

Could you please confirm whether:

• Is Riser 2A fully compatible with the L4 when using the 470-BBWW enablement kit, even though the configurator does not show the GPU option?

• Or is Riser 3A actually the required configuration for L4 support on the R760xd2?

• Does the 470-BBWW kit effectively convert Riser 2 into a GPU-capable configuration?

I just want to make sure there is full alignment between the recommended parts and the configurator logic, as this is for a customer project and I want to avoid any ordering mistakes.