UNSOLVED
PowerEdge T130
Good Day I have a issue with a Poweredge T130, upon startup it passes memory test server gets stuck at Loading Bios Drivers the Indicator light on the front panel flashes amber and just gets stuck no hardware changes has been done to server, I have tried to remove cmos battery disconnected all cables and mainboard and reconnected still no luck. Thank you
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
507
0
Posted March 18th, 2019 06:00
Clockz,
I would suggest you power down the server and take the T130 to its Minimum to Post configuration, that is removing everything from the server but the following;
•System board
•CPU with heat sink
•Single DIMM configuration with DIMM in socket A1
•Control panel with cable (to power system on)
•Power supply unit
After that then power up and see if the issue persists, if so then it is likely one of the devices listed above causing the issue.
Let me know what you see.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!