UNSOLVED
T
TopherCeeDubb
1 Message
0
1324
July 17th, 2018 16:00
T3500 won't post
My PC powers on but won't post and has no beep codes. The error code displayed on the case is a blinking 2. Any advise will help, thank you. The pc is a Dell Precision T3500
A power failure has been detected in one of the onboard system board regulators. This could be caused by a failed system board component or by a plug-in device creating a short on a regulated power rail. (PS_ON asserted, PS_PWRGOOD asserted, SYS_PWRGOOD de-asserted)
Tesla1856
10 Wizard
•
17985 Posts
•
71600 Points
1257
0
Posted July 17th, 2018 18:00
Desktops:
Beep/Flash codes:
2 = No RAM detected.
Maybe Re-seat RAM?
https://dell.com/community/Alienware-General/Alienware-Desktop-General-Hardware-Troubleshooting/m-p/5555517#M57436
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.