Solved!
Go to Solution3842
1
Posted December 16th, 2021 07:00
Hi Carl, I just managed to get it working. What I did was:
1. Once downloaded, extract ZIP file to DESKTOP. (Very important to EXTRACT to DESKTOP)
2. Once the ZIP file is extracted onto DESKTOP screen, open the folder \1320c_DRV_ENG_01-01-06-00_01-01-06-00\English\Drivers\Win_x64
3. Here, there will be many files. Locate dlhsnzi.inf.
(Quick tip: To view file extensions (e.g .inf), go to the top of the folder, then select VIEW --> enable this by checking FILE NAME EXTENSION (should be on right-hand side). Now you will see all the file extensions)
4. Right-click with mouse dlhsnzi.inf and then select 'Install' (should be 3rd option from top).
Right-click dlhsnzi.inf and then select 'Install''
5. Now, go back to your Desktop screen, type 'Settings' in search bar (bottom-left).
6. Now, type 'printers' in the search bar at top.
7. Select 'Printers & Scanners'.
8. Your Dell Color Laser 1320c should be there. Please select it and there should be 3 options 'Open queue', 'Manage', 'Remove device'. This should mean that your PC recognises your DELL Color drivers now.
9. Now, open any document and print, remembering to select 'Dell Color Laser 1320c', if not set to default printer!
This is what I did for my PC and it is working.
28323
0
Posted October 28th, 2015 07:00
Hi Jesse,
Thank you for your help. There are three files on the suggested page. Do you I need to install all three to make printer Dell 1320c work correctly or I can install only Drivers for OS Deployment?
Regards
Max
28323
0
Posted February 16th, 2016 14:00
Hi I've just upgraded to win10 and now much 1320c prints come out faint no amount of changing the settings seems to have any affect at all any suggestions
Thanks Iain
28324
1
Posted January 4th, 2017 08:00
Thanks very much littlebriar!
28324
0
Posted August 10th, 2017 01:00
Hello
I have installed
DellPrinter1320c_SSW_20130221.exe
and the printer seems to be recognised, but any print jobs sent to the printer disappear.
I have a dual boot W7 and the printer works fine on W7, so there appears to be a fault in the proposed driver for W10.
Please advise
Thanks
JC
18336
0
Posted July 12th, 2019 08:00
Did you ever get this solved?
12881
0
Posted January 3rd, 2020 12:00
I am not sure? I seem to have no issues printing from one of my personal computer but I have an issue with my work computer both are the same model Dell Latitude 5285. My issue is, the printer does not want to pick up paper from the tray only the bypass. However, the printer will pick up from the tray if I press both the Continue and Cancel buttons for a test print. After I had all the factory installed software removed and a plain version of Windows 10 installed my personal computer, magically the printer started to print from paper tray.
Anyone have any ideas if there is a special trick so I can get my 1320c printer to function with a work computer?
littlebriar
1 Message
29268
0
Posted October 25th, 2016 11:00
I know this is old, but some may find my experience with Windows 10 anniversary update helpful.
You can download the latest driver from the Dell site here.
I found that after the windows 10 anniversary update, the drivers reverted to very basic options and no manual duplex mode. I used the above software to update the driver but the problem persisted. I had to expand the file, and save the expanded folders/files. I then right click the printer in Printers and Devices, went to printer properties, advanced, then New Driver. After clicking next I selected Have Disk and pointed to Win_x64 folder under Drivers. Windows found the inf file and installed it. Now I have full functionality as before including manual duplex.