I moved my 966 to a Vista 64-bit machine and have tried to install it. I get to the point where it asks me to plug in the USB cable, but the computer will not recognize the printer. I've restarted the computer. I've plugged the USB cable into a known good USB port. I've swapped the USB cables. I've restarted the 966. Nothing works. No Dell printer has been installed on this machine before, so there are no old Dell files. How do I get the computer to recognize the printer?
Uninstalling and re-installing the drivers in the prescribed manner and starting the services necessary for the scanning application could resolve the problem.
Follow the below steps to reinstall the printer drivers in prescribed manner.
Please disconnect the USB cable that runs from the printer to the computer and uninstall the printer driver by using uninstaller software. Here is a link to download one.
Install the software and uninstall the printer driver using the Advanced Uninstall option from the software. It is third party uninstaller software used to uninstall the drivers/programs from the computer.
The software prompts asking you to delete the Registry keys corresponding to the printer driver. Select all and delete them. Restart the computer to remove any traces of the printer software.
Perform the steps below and ensure that the services required for the printer to work are started.
1) Press the “Windows + R” to launch the run window.
2) Type “Services.msc” in the run window and hit the Enter key.
Right click each service mentioned below, click properties. Set the startup type as “Automatic” from the drop down menu and click “Start”. Please click “Apply” to save the changes.
The services to be enabled are:
Human Interface Devices (HID).
Printer Spooler.
RPC (Remote Procedure Call).
RPC Locator (Remote Procedure Call Locator).
Windows image acquisition (WIA).
Windows Installer.
Insert the printer driver’s cd for A966 and install the drivers in the computer.
If you do not have a cd use the following steps to download the printer drivers.
That did not work. Same problem. Oh, yes, I've tried 3 different USB cables and 3 different USB ports, including one which had been connected to the mouse.
We can check in Device Manager if the printer is detected under “Imaging Devices” or “Other Devices” when the printer is switched on and connected with a USB cable.
Steps to navigate to Device Manager:
Click “Start”, type “Device Manager” and press Enter.
Double click “Imaging Devices” or “Other Devices” and check if the printer is listed.
As the printer is not detected in device manager, the problem could be with the USB port on the printer. To confirm this, we can try connecting the printer to another computer if available.
Download the proper Vista drivers. Install the drivers, you'll get a message, then printer is not connected. Connect the printer at this time(powered on)
The printer worked fine when attached to a Windows 7 machine. I have tried the 3 different USB ports on the Vista machine. All 3 ports work with flash drives and a wireless mouse receiver, so the USB ports are good.
DELL-Nikhil D1
6 Operator
•
2580 Posts
784
0
Posted December 11th, 2012 18:00
Hi
Uninstalling and re-installing the drivers in the prescribed manner and starting the services necessary for the scanning application could resolve the problem.
Follow the below steps to reinstall the printer drivers in prescribed manner.
Please disconnect the USB cable that runs from the printer to the computer and uninstall the printer driver by using uninstaller software. Here is a link to download one.
http://revouninstallerpro.com/
Install the software and uninstall the printer driver using the Advanced Uninstall option from the software. It is third party uninstaller software used to uninstall the drivers/programs from the computer.
The software prompts asking you to delete the Registry keys corresponding to the printer driver. Select all and delete them. Restart the computer to remove any traces of the printer software.
Perform the steps below and ensure that the services required for the printer to work are started.
1) Press the “Windows + R” to launch the run window.
2) Type “Services.msc” in the run window and hit the Enter key.
Right click each service mentioned below, click properties. Set the startup type as “Automatic” from the drop down menu and click “Start”. Please click “Apply” to save the changes.
The services to be enabled are:
Insert the printer driver’s cd for A966 and install the drivers in the computer.
If you do not have a cd use the following steps to download the printer drivers.
Download the printer driver from the link below.
http://www.dell.com/support/drivers/us/en/19/Product/dell-966w
NOTE: Please do not connect the printer using the USB cable to the computer prior to installing the drivers.
Please copy the above mentioned link, paste it in the address bar of the new internet explorer window.
1) Select the operating system of your computer from the list.
2) Save the file to the desktop.
3) Double-Click on the downloaded file.
4) Click “Yes”, when the utility prompts to extract the files.
5) Follow the onscreen instructions to complete the installation.
6) Connect the printer using the USB cable when prompted.
7) Try to print.
Please reply for further help.