UNSOLVED

dadremuse

updated

20 years ago

D

dadremuse

6 Posts

0

49148

April 8th, 2007 12:00

A920 AIO Printer Connectivity

I have purchased an Dimension E521 Desktop with Windows Vista Home Premium. After installing my A920 printer software I discovered that this was incompatible with Vista and was awaiting driver updates. I downloaded the driver update, 7th April, for Vista 32-Bit as advised (R153047.exe) and attempted to update. The same connectivity failure message appears. I have uninstalled completely and tried again, but the same problem exists. I can see a large number of people are having the same problem with similar printer systems. Any advise please
  • 556

    0

    Posted April 8th, 2007 14:00

    I'm having the same problem with my A940...so far, tech support has not been able to help.  If I resolve the problem, I'll let you know!
     
  • 556

    0

    Posted April 8th, 2007 15:00

    I just posted similar problem with my AIO 962.  Ugh!  I'll keep watch here to see if anyone gets it figured out.
     
  • Gina Q

    2 Intern

    •

    1662 Posts

    556

    0

    Posted April 9th, 2007 14:00

    If you have upgraded your system from XP to Vista and are having a communicaiton error please read through this thread. If you continue to have a communication error please follow the instructions given by Eric Rendel. You will find the link to his thread at the bottom.
     
  • 556

    0

    Posted April 9th, 2007 15:00

    Gina -
     
    Unfortunately mine also is a E521 Dell new with Vista Home Premium on the machine.  Using the driver provided online to upgrade the printer has been deemed useless.  I have had Dell tech's work on it and the response I received was it's a printer problem....
     
    Since the printer worked & still works fine with my laptop, I believe there is an issue with the driver program which was created to upgrade the printer to work with Vista.
  • dadremuse

    6 Posts

    556

    0

    Posted April 9th, 2007 15:00

    Hi Gina, my system was bought new with Vista pre installed. There is no upgrade going on. The printer works fine on Windows XP with other desktops and laptops, so the problem is with the drivers. Once the update is installed it shows the printer as "Ready", but as soon as you attempt to print anything, it changes to "Offline" and the communication error message appears. If there is a need to delete some other files on the system to allow installation to work properly then I think there needs to be some clearer instruction.
    Thanks,
  • Gina Q

    2 Intern

    •

    1662 Posts

    556

    0

    Posted April 9th, 2007 16:00

    The printer is compatible with Vista. You both indicate that the system came pre-installed w/Vista and this is a desktop system. Which USB port are you using? If one in the front please uninstall the software and then reload it, when asked to plug in the printer, plug it into one of the USB ports on the back. If you have the printer connected in the back do the uninstall reinstall and move it to one of the front USB ports. Also, a firewall can cause the printer to not print. If the previous does not work the configure the firewall. Here's an article that will help configure he firewall.
     


    Message Edited by DELL-Gina on 04-09-2007 12:26 PM
  • dadremuse

    6 Posts

    556

    0

    Posted April 9th, 2007 20:00

    Hi Gina,
     
    I have uninstalled and reinstalled in just about every USB port there is on the computer! I followed the firewall suggestions, but there are no programmes blocked on the McAfee firewall, and I can't find any sign of a file called AIOC.exe in the list or on my system.
    The best I can do is get the scanner to work, but the moment I try to print or scan the device changes from ready to offline. 
     
  • lissa86

    5 Posts

    556

    0

    Posted April 9th, 2007 22:00

    I have had the same problem.  Whenever I try to print on my A920 the document goes into the pending queue, and I can't get the printer to be online. 
     
    With the All In One Center I can make the printer scan, so I know the connection is ok, but it just will not go to 'online' status.  I have Windows Vista, and I downloaded the driver from the Dell website and followed all the instructions as posted earlier, and it still isn't working.  My printer works on other computers that have Windows XP.


    Message Edited by lissa86 on 04-09-2007 06:10 PM
  • lisa920

    2 Posts

    556

    0

    Posted April 9th, 2007 23:00

    Wow I didn't realize so many people were having problems.  We just got a new computer with Vista and can't find a printer/aio to work right either.  Does anyone  have any suggestions? 
  • lissa86

    5 Posts

    455

    0

    Posted April 10th, 2007 13:00

    Don't buy a Dell Printer.