I have just recently installed two new printer cartridges, but when i print anything the black print is coming out all smudged. The computer is saying that it can not automatically align, " there may be the plastic srip cover still on". There is no plastic on the cartridge has anyone any ideas.
thanks
When you don't use your ink carts for a while, when you get new ink carts that have been stored in warehouses for a number of months, or when you have refilled a slightly too dry ink cart, the print head nozzles on the bottom of the ink carts get clogged with dried ink. The printer thinks that you may have left the tape on the bottom of the ink cart. The printer head cleaner menu will NOT dissolve the dried ink. Water will. Try this. Soak the bottom of the clogged ink cart in 1/2 inch of warm water for 15 minutes. Blot dry with clean paper towel (you should see the ink color on the towel). Retry.
Thanks for the info, but the ink is flowing freely out of the bottom of the cartridge, if anything it is flowing too much. Asingle line will come out about 2cm thick!!
1, take the ink out and let it sit (same position as it would in its tray) for a while to see if it is leaking (running on its own)
If that is the case then it is a defective cart. (return to shop). If not replace back into tray but this time be aware of how you put it in.
2, take the ink cart out, wipe the base and the clean any residue from the tray and tray cushion, repeat 1 and then replace and test.
william_the_sco
2 Intern
•
1446 Posts
153
0
Posted September 1st, 2006 13:00