Please follow the instructions below and then tell me what happens.
First, let's make sure your computer has the latest Windows Updates, especially .net framework, needed to run many applications and the latest Java.
Disconnect your printer.
Download and run this patch to completely remove the printer from your computer. Run the patch, a MUST on Vista computers, until it prompts you to restart your computer.
Install the proper drivers. You'll be prompted when to connect your printer(powered on)
***To install drivers, sometimes the file unzips and does nothing. You have to look for the setup.exe file, right click on it, then left click run as administrator***
If using Windows 7, use the Vista drivers in the compatibility mode.
Right click on the setup.exe file, left click properties, left click compatibility. Change the compatibility to Vista(Try Vista SP2). Then install the proper drivers. You'll be prompted when to connect the printer(powered on)
***To install drivers, sometimes the file unzips and does nothing. You have to look for the setup.exe file, right click on it, then left click run as administrator***
I was able to install the vista driver and then print. I did not do anything special to set the compatibility mode. So far I have encountered no problems. I printed the alignment page and test page that installation delivers, then a very short text document and a mapquest page saved to a document. I had printer properties set to use only black and white, as is my usual practice.
Download the Vista 32-bit drivers for Windows 7 8 and 8.1 32-bit or the Vista 64-bit drivers for Windows 7, 8 and 8.1 64-bit. Install the Vista drivers in the Vista Compatibility mode You'll get a message, the printer is not connected. Connect the printer at this time(powered on).
Before you proceed, if you installed/reinstalled/upgraded Windows 8.1 on the computer, please make sure you installed the drivers in the correct order.
Start with the Dell System Software and the chipset drivers and follow the list.
Then use the Vista drivers for the printer in the Vista SP2 Compatibility mode Once the drivers are installed, you'll get prompted to connect the printer(powered on)
Remember virus programs and firewalls will block communications. If you did not install any, Windows Defender is the default.Try reading...
I am having a problem with downloading anything from Dell Driver Download Manager. After I save the file the and try and download a message say that: There are no files to download. Please go to Drivers and Downloads to select file(s). How am I suppose to download the patches?
I downloaded the patch to remove the printer (even though I think I may have already removed it) you listed above and it ran and my computer rebooted, but now since it restarted the bar with icons that were shortcuts to various things (I don't know what its called, it was automatic, had a camera for all the photo options, music, games, ect.) that went across the top of my desktop screen is no longer there, and I am wondering what happened, if other things were removed by that patch too. PLEASE HELP!!!!!!!!!!!
What I am referring to that has been removed is the Dell Dock Bar. when I searched my computer for it, I was told it has been removed. Why did this happen? Did that patch remove ALL of my Dell software? What can I do to get all the software pack if that's what happened. The dock bar was there right before, and after that patch ran it was removed. HELP PLEASE!
dcostrell
1 Message
3435
1
Posted June 23rd, 2014 10:00
I was able to install the vista driver and then print. I did not do anything special to set the compatibility mode. So far I have encountered no problems. I printed the alignment page and test page that installation delivers, then a very short text document and a mapquest page saved to a document. I had printer properties set to use only black and white, as is my usual practice.
So far, so good.