Solved!
Go to Solution647
0
Posted July 2nd, 2009 13:00
sure, substitute for your device names, you can also do ranges if devices are consecutive.
Message was edited by:
dynamox647
0
Posted July 2nd, 2009 13:00
we have to put this ina file and do symconfigure preview and symconfigure commit?
I need to do this,
convert dev 0BAD to BCV+R-5;647
0
Posted July 3rd, 2009 05:00
You can also use the following syntax if you are running a recent S.E.
symconfigure -sid xxx -cmd "convert dev 0BAD to BCV+R-5;" -nop preview/prepare/commit647
0
Posted July 20th, 2009 13:00
What does raidset=false means in the preview output?
symconfigure -sid xxxx -v -f std-bcv.txt preview
Execute a symconfigure operation for symmetrix '0001901xxxxx' (y/ ) ? y
A Configuration Change operation is in progress. Please wait...
Establishing a configuration change session...............Established.
Processing symmetrix 0001901xxxxx
{
convert dev 0AEE to BCV+R-5, raidset=false;
}
Performing Access checks..................................Allowed.
Checking Device Reservations..............................Allowed.
Submitting configuration changes..........................Submitted
Locking devices...........................................Locked.
Validating configuration changes..........................Validated.
Closing configuration change request......................Closed.
Terminating the configuration change session..............Done.
The configuration change session has completed successfully.
Message was edited by:
MikeMac
Removed Symm S/N647
0
Posted July 20th, 2009 13:00
From the Solutions Enabler Array Controls CLI Product Guide:
raidset = When requesting to convert a RAID-S group to unprotected devices, set raidset equal to TRUE and list the first RAID-S member. It is not necessary to list the other members.647
0
Posted July 20th, 2009 13:00
What does raidset=false means in the preview output?
symconfigure -sid xxxx -v -f std-bcv.txt preview
Execute a symconfigure operation for symmetrix '0001901xxxxx' (y/ ) ? y
A Configuration Change operation is in progress. Please wait...
Establishing a configuration change session...............Established.
Processing symmetrix 0001901xxxxx
{
convert dev 0AEE to BCV+R-5, raidset=false;
}
Performing Access checks..................................Allowed.
Checking Device Reservations..............................Allowed.
Submitting configuration changes..........................Submitted
Locking devices...........................................Locked.
Validating configuration changes..........................Validated.
Closing configuration change request......................Closed.
Terminating the configuration change session..............Done.
The configuration change session has completed successfully.
Message was edited by:
MikeMac
Removed Symm S/N647
0
Posted July 21st, 2009 00:00
You need to true the raidset value only for RAID S device
Sanjeev Tanwar
dynamox
11 Legend
•
20419 Posts
•
87439 Points
647
0
Posted December 24th, 2008 13:00