Please go to the following link:

<ADMIN NOTE: Broken link has been removed from this post by Dell>.

The DRAC 4 ports are listed on this page with an explanation of each.

Thank you for using Dell Community Forums!

Wow that was quick. OK - have looked at the information - very good, but seem to be having a problem.

I am using ssh to connect to the server -- can login fine and the console comes up but fails at the last moment with

hello Ian..

We have the same problem, i guess.

We have made a setup with a 1:1 NAT table. When we load the client java console thingy, it's trying to connect to the LAN ip adresse... from the outside.. it's NOT that smart. it would be better if it did use the hostheader, or simply an WAN ip setting..

It would be really nice if there could be taken care of this very simple problem.

network:

Web Client ----> WAN ip [firewall] ---> LAN ip [Drac 4]

Message Edited by DELL-MichelleT on 11-10-2004 08:14 AM

Sorry.. we danes are stupid..

could you be so kind to quote what i can't see ?

****, i'll send you a case of danish special xmas brew if it's what i need..

This is not a problem whatever tcp port not to block, but a simple question on the drac is using a wrong (internal) IP address from an external browser when entering the java application to open the console.

So please do tell me.. (i'll make it worth your time ;)

We have this problem, too. The DRAC embeds its IP address in what it sends to the remote, causing the remote's Java applet to try to connect to that IP address. The problem is that the IP address may be a private one, behind a NAT firewall, while the remote may be across the Internet somewhere, making such a connection completely impossible. If the DRAC could be configured to use a host/domain name, it would be very easy to maintain that in DNS somewhere or create a dynamic DNS entry for it.

This is an incredibly bad problem that has forced us to tell customers they have to connect the DRAC port to a dedicated public IP address. Very nasty, and some places simply won't do it.

That link takes me to a page that has no meaningful content whatsoever.

...and still waiting.

MichelleT, thanks for providing a link but it seems rather out of date as there is nothing on the page. I am getting the same error, vkvm unable to connect, but I am not behind a firewall at all. This is a new install and other DRAC 4 cards work fine. I have read through the DRAC 4 documentation and cannot find anything helpful. Is there an updated link that might help explain what could be wrong?

The article states:
Make sure that you have installed Sun Java JRE 1.4.2 or later on the management station. You must also disable the Java cache from the Java Control Panel. You can download this JRE version from java.sun.com.

Here is a better link:
http://support.dell.com/support/edocs/software/smdrac3/drac4/1.35/en/ug/racugbk.pdf
Do a search for the vKvm.