natip,

       Which server are you using? Is it iDRAC6 or iDRAC7.

           One of the options you can explore when OS images are available on shared folder is Remote File Share(RFS) Feature from iDRAC. You need to have Enterprise license on iDRAC to use this feature.

You can get more details on RFS in below link

ftp.dell.com/.../integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95_User%27s%20Guide_en-us.pdf

Refer section "Remote File Share" on the document

Natip,

For better understanding.. which OS you are trying to install? on which controller?

Regards,

Sasi

Hi,

I will install Windows 2012 on remote server in US. Remote file server that holds ISO image is also in US. So as connection is very limited how could I solve this by installing OS from my computer's iDRAC console. I don't have permission to logon to file server and run iDRAC console on it.

We use Integrated Dell Remote Access Controller 6 - Enterprise. Could not open Remote File Share(RFS) link.

ftp.dell.com/.../integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95_User%27s%20Guide_en-us.pdf

could you please paste full path to the file?

And how to that FRS and howwe will benefit from it? I always use Virtual Media to attach the iso, but since ISO is on remote US server it will be problem for installing remote US computer form my workstations iDRAC console

thanks

Find the complete link below

ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95_User%27s%20Guide_en-us.pdf

Remote File Share feature will enable you to mount image from share to server. This feature is similar to vMedia instead of having the image on local drive it can be placed on share. iDRAC Support both CIFS and NFS share. In your case you can mount the image on the share using Remote File Share feature and install OS using iDRAC Console.

This feature can be accessed through iDRAC GUI (System -> Remote File Share). Refer help page for details. You can do the same through racadm command as well. "racadm remoteimage" command can be used for the same. For help run the command "racadm help remoteimage"

The user guide say:

To enable remote file sharing through the iDRAC6 Web interface, do the

following:

1 Open a supported Web browser window.

2 Log in to iDRAC6 Web interface.

3 Select the System-->Remote File Share tab.

The Remote File Share screen is displayed.

But I can not find System-->Remote File Share even we use:

Integrated Dell Remote Access Controller 6 - Enterprise

it is T710 and firmware is 1.11.

I am ready to update firmware now to 1.95 with SUU, but I can not restart server. Will I be required to restart server after only iDRAC firmware upgrade?

thanks

Can you let me know, Which server you have and What is your iDRAC Firmware Version. Remote File Share feature is introduced from iDRAC firmware version 1.50.50 onwards

will IP address will be reset after iDRAC firmware upgrade?

Hello natip,

Your IP address should remain the same. Also, a reboot is required after iDRAC update.  For latest Firmware versions and other information, please see: www.delltechcenter.com/idrac or www.delltechcenter.com/LC

steve

Hi Steven,

he say it does not require restart of server just restart of DRAC card

www.bladewatch.com/.../firmware-upgrade-on-dracidrac

he also does not say about server restart:

en.community.dell.com/.../3206.updating-drac-firmware.aspx

so where is the true?

thanks