Solved!
Go to SolutionUnity: PowerPath recommended failover policy?
I checked several documents but could not find the recommended PowerPath failover policy, such as adaptive, basic failover, Clariion optimization (P.258-260 EMC PowerPath Family 6.x CLI and System Messages Reference) for Unity.
Does anybody know which policy is suitable for Unity?
shivadaimler
1 Rookie
•
24 Posts
1717
0
Posted February 26th, 2017 19:00
Hi Glen,
In VNX while registering a host we used to set fail over mod setting based on host for AIX 1 etc. i registered Hosts in Unity there was no option asking for fail over mode etc. So in Unity dont we need to specify the fail over mode or what has changed in Unity that we dont need to specify a failover mode?
Thanks,
Shiva
Rainer_EMC
6 Operator
•
8645 Posts
1717
0
Posted February 27th, 2017 02:00
Unity always uses failovermode 4
no need or option to configure differently
see the host configuration guides for details
shivadaimler
1 Rookie
•
24 Posts
1717
0
Posted February 27th, 2017 19:00
Ok i did check host connectivity guide dont see any option for Unity failover mode. So it should be always 4.
Thanks Rainer,
kelleg
6 Operator
•
4537 Posts
1717
0
Posted August 2nd, 2016 15:00
CLARiiON Optimized (CLAROpt) is the recommended policy setting. Failover mode 4 is recommended setting
glen