A few days ago my computer had a trojan that opened internet browsers. I think that I got rid of it, but ever since then I've been getting an error message about not being able to find the module. I tried to do a system restore, but that didn't help. Everything else seems to be working fine. So here is my HijackThis log. Any help would be greatly appreciated.
Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 2:59:14 PM, on 11/20/2009 Platform: Windows Vista SP1 (WinNT 6.00.1905) MSIE: Internet Explorer v7.00 (7.00.6001.18319) Boot mode: Normal
It appears that you may still have some malware in there. You mentioned that you think you got rid of it. What procedure did you use to do that?
I am reviewing your log. In the meantime, you can help me by addressing the following:
* Have you have posted this issue on another forum? If so, please provide a link to the topic.
* If you have disabled System Restore in an attempt to begin cleaning malware, please enable it now. We will flush System Restore when we are finished cleaning and we are sure that everything is running smoothly.
* If you are using any cracked software, please remove it. In addition to being illegal, when you install cracked software, you are running executable files from dubious, unknown sources. You are giving these sources access to information on your hard disk, and potential control over operation of your computer. Definition of cracked software HERE.
* If you are using any P2P (file sharing) programs, please remove them before we clean your computer. The nature of such software and the high incidence of malware in files downloaded with them is counter productive to restoring your PC to a healthy state. That includes BitTorrent and similar programs. There is a partial list HERE.
* If this computer belongs to someone else, do you have authority to apply the fixes we will use?
* After we begin working, please print or copy all instructions to Notepad in order to assist you when carrying out procedures. Please follow all instructions in sequence. Do not, on your own, install/re-install any programs or run any fixes or scanners that you have not been instructed to use because this may cause conflicts with the tools that I am using. Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate. It is understood by the trained analysts that once a helper replies to a log, he continues working with you until the issue is resolved.
* During the course of our cleanup please do not do any additional online work or surfing until we have verified that your system is clean.
* We may be using some specialized tools during our fix. Certain embedded files that are part of legitimate programs or specialized fix tools such as process.exe, restart.exe, SmiUpdate.exe, reboot.exe, ws2fix.exe, prcviewer.exe and nircmd.exe may at times be detected by some anti-virus/anti-malware scanners as a "RiskTool", "Hacking tool", "Potentially unwanted tool", or even "malware (virus/trojan)" when that is not the case. Such programs have legitimate uses in contexts where an authorized user or administrator has knowingly installed it. These detections do not necessarily mean the file is malware or a bad program. It means it has the potential for being misused by others. Anti-virus scanners cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert you or even automatically remove them.
I look forward to your reply so we can begin cleaning.
Instructions posted for this user are customized for this user only. The tools used may cause damage if used on a computer with different infections. If you think you have similar problems, please post a log at the top of this board to start a new forum topic.
I forgot to answer your question about removing the malware. I had a McAffe warning pop up telling me that it had detected a trojan- unfortunately I didn't write down what type it was- and it had a button to remove the trojan and scan my computer. I clicked that, and after that I didn't have problems with the internet opening random browsers, but the system32 warning still popped up when I started my computer.
Let's run a scan with MBAM. * If you are unable to download or install MBAM on your computer, see if you can use a friend's or family member's computer to download MBAM. Use the update link mentioned below to manually update. Once downloaded, rename the program installer "mbam-setup.exe" file to something else like "lookinhere.exe". Copy the installer file and the update file to a CD or flash drive. Transfer the files to the infected computer. Install the "lookinhere.exe" file, then run the update so that you will have the current definitions. After that, run a full system scan and select to have the program REMOVE whatever it finds.
Double-click on mbam-setup.exe to install the application.
When the installation begins, follow the prompts and do not make any changes to default settings.
When installation has finished, make sure you leave both of these checked:
Update Malwarebytes' Anti-Malware
Launch Malwarebytes' Anti-Malware
Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan.
If an update is found, the program will automatically update itself.
Press the OK button to close that box and continue.
If you encounter any problems while downloading the updates,
manually download them fromhere and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.
On the Scanner tab:
Make sure the "Perform Quick Scan" option is selected.
Then click on the Scan button.
If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
The scan will begin and "Scan in progress" will show at the top.
It may take some time to complete so please be patient.
When the scan is finished, a message box will say "The scan completed successfully.
Click 'Show Results' to display all objects found".
Click OK to close the message box and continue with the removal process.
Back at the main Scanner screen:
Click on the Show Results button to see a list of any malware that was found.
Make sure that everything is checked, and click Remove Selected.
When removal is completed, a log report will open in Notepad.
The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
Copy and paste the contents of that report along with a fresh HijackThis log into your next reply and exit MBAM.
Note:-- If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.
-- MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes (like Spybot's Teatimer), they may interfere with the fix or alert you after scanning with MBAM. Please disable such programs until disinfection is complete or permit them to allow the changes.
**If you need to re-install MBAM but encounter issue in re-installing, try using the MBAM Cleanup Utility by downloading it from HERE
Bugbatter
4 Apprentice
•
20487 Posts
325
0
Posted November 20th, 2009 15:00
Hi cjsquared,
It appears that you may still have some malware in there. You mentioned that you think you got rid of it. What procedure did you use to do that?
I am reviewing your log. In the meantime, you can help me by addressing the following:
* Have you have posted this issue on another forum? If so, please provide a link to the topic.
* If you have disabled System Restore in an attempt to begin cleaning malware, please enable it now. We will flush System Restore when we are finished cleaning and we are sure that everything is running smoothly.
* If you are using any cracked software, please remove it. In addition to being illegal, when you install cracked software, you are running executable files from dubious, unknown sources. You are giving these sources access to information on your hard disk, and potential control over operation of your computer. Definition of cracked software HERE.
* If you are using any P2P (file sharing) programs, please remove them before we clean your computer. The nature of such software and the high incidence of malware in files downloaded with them is counter productive to restoring your PC to a healthy state. That includes BitTorrent and similar programs. There is a partial list HERE.
* If this computer belongs to someone else, do you have authority to apply the fixes we will use?
* After we begin working, please print or copy all instructions to Notepad in order to assist you when carrying out procedures. Please follow all instructions in sequence. Do not, on your own, install/re-install any programs or run any fixes or scanners that you have not been instructed to use because this may cause conflicts with the tools that I am using. Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate. It is understood by the trained analysts that once a helper replies to a log, he continues working with you until the issue is resolved.
* During the course of our cleanup please do not do any additional online work or surfing until we have verified that your system is clean.
* We may be using some specialized tools during our fix. Certain embedded files that are part of legitimate programs or specialized fix tools such as process.exe, restart.exe, SmiUpdate.exe, reboot.exe, ws2fix.exe, prcviewer.exe and nircmd.exe may at times be detected by some anti-virus/anti-malware scanners as a "RiskTool", "Hacking tool", "Potentially unwanted tool", or even "malware (virus/trojan)" when that is not the case. Such programs have legitimate uses in contexts where an authorized user or administrator has knowingly installed it. These detections do not necessarily mean the file is malware or a bad program. It means it has the potential for being misused by others. Anti-virus scanners cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert you or even automatically remove them.
I look forward to your reply so we can begin cleaning.
Instructions posted for this user are customized for this user only. The tools used may cause damage if used on a computer with different infections. If you think you have similar problems, please post a log at the top of this board to start a new forum topic.