UNSOLVED
HK
Helpdesk Koenig
3 Posts
0
2113
May 4th, 2012 05:00
How to use the server_param command
Hello Community Network,
we have a simple Question. After a long time we try to use the server_param command. But wenn we try to start this command from the CLI (localy at the Contrallstation), we only get an Error Message after this command.
server_param server_2 -facility NDMP -info
Then we get this Error
[root@VNX1-CS0 /]# server_param server_2 -f NDMP -info
bash: server_param: command not found
Anyone an Idea, because we knew that this was an easy to solve Problem.
With friendly Regards
Helpdesk Koenig Neurath AG
Helpdesk Koenig
3 Posts
625
0
Posted May 4th, 2012 06:00
Oh,
i´m sorry, but it was the right answer. I only tested the su command. Now i logged off and create a new session with the nasadmin then it works.
Thanks for the fast answer.
Greetings
Helpdesk Koenig
3 Posts
625
0
Posted May 4th, 2012 06:00
hi,
Unfortunately, this information brought nothing.[nasadmin@VNX1-CS0 /]$ server_param server_2 -f NDMP -info
bash: server_param: command not found
Same Error
Greetings.
SAMEERK1
296 Posts
625
0
Posted May 4th, 2012 05:00
hi,
login as nasadmin and try to run the command or switch the user from the root login :
su - nasadmin
this should help
Thanks and Regards
Sameer Kulkarni
eServices
Customer Support Services
EMC²
Where information lives
Email - kulkarni_samer@emc.com
E-service at your fingertips: http://powerlink.emc.com