Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionH
Harishankar
2 Posts
0
980
September 6th, 2017 01:00
MirrorView Configuration
Hi There,
I was wondering where does MirrorView configuration details are captured by SPCollect script. I couldn't located anything under SPA_cfg_info file.
Or those details are not captured here. Please suggest.
Thanks
Harry
Harishankar
2 Posts
717
0
Posted September 8th, 2017 04:00
Thank you Mohammad Makadmeh!
m_makadmeh
43 Posts
717
0
Posted September 6th, 2017 04:00
Hello Harry,
You may need to extract the SPCollect Output, then extract the compressed file that ends with _rtp (i.e. CKM00XXX_SPA_XXX_rtp).
You will find the MirrorView configuration in a file named as "SPA_mirror_info.txt"
For SPCollect output visual view, you need to download and install Unisphere Service Manager in your PC
- Open the USM.
- In the right side panel, under reports; click n View System Configuration.
- Browse and add the SPCollect output -> click next -> follow the wizard then you can see the SPCollect output as vitual GUI reports.
Best Regards,
Mohammad Makadmeh