UNSOLVED
Problem Reinstalling XP unregmp2.exe
While re-installing my XP professional version I received the following error:
"unregmp2.exe Entry Point Not Found
The procedure entry point GetIUMS could not be located in the dynamic link library MSDART.dll".
The procedure seems to be stuck.
THe set up screen keeps telling me the remaining time to complete, I see different advertisement from Windows popping up behind my error dialog box but it does not seems that the re-install continue.
In a first attempt I started the procedure while I was already logged in and after receiving the message above I interrupted the procedure booted from the XP professional CD which came with the PC (it is a pre-installed PC so I just have the Dell CD with Xp for recovery/reinstall).
THe same happened again during the "Installing Windows" phase of the set up procedure.
This right after the procedure asked me to install some of the drivers form HW I added last year (FM/AM receiver and Television + Guitar Port device) don´t know whether this is related somehow.
Even if the OK button is clicked on the dialog box it keeps popping up everytime.
Any help is greatly appreciated.
Max
307
0
Posted June 30th, 2004 19:00
Try this:
Boot to the recovery console:
To start the computer and use the Recovery Console
From the Setup CD-ROM
Insert the Setup compact disc (CD) and restart the computer. If prompted, select any options required to boot from the CD.
When the text-based part of Setup begins, follow the prompts; choose the repair or recover option by pressing R.
If you have a dual-boot or multiple-boot system, choose the installation that you need to access from the Recovery Console.
When prompted, type the Administrator password.
At the system prompt, type Recovery Console commands; type help for a list of commands, or help commandname for help on a specific command.
To exit the Recovery Console and restart the computer, type exit.
If you have already installed the Recovery Console
During Startup, select Recovery Console from the startup options menu.
If you have a dual-boot or multiple-boot system, choose the installation that you need to access from the Recovery Console.
When prompted, type the Administrator password.
At the system prompt, type Recovery Console commands; type help for a list of commands, or help commandname for help on a specific command.
To exit the Recovery Console and restart the computer, type exit.
dextern
9 Posts
307
0
Posted June 30th, 2004 16:00
Re run the procedure again.
THis time I said NO to the question whether I wanted to install the devices mentioned in the previous message but still have the same problem and error message.
Max