tndorr1

updated

18 years ago

T

tndorr1

7 Posts

0

53478

February 14th, 2009 16:00

Re-Installation CD

I am getting the message "windows could not start because the following file is missing or corrupt 'c\windows\system32\config\system. I can not get to the Recover Console and don't have a re-installation cd.  Is there anything I can do other than request the CD from Dell.  The only CD that came with the Dimension 9100 was for Office 2003.  If I have a friend with an XP installation CD would it work on my PC to get it booted up?  Does this sound like something that is recoverable?  Hopefully I am not going to need a new PC right now.

Thanks for any help you can provide.

  • tndorr1

    7 Posts

    698

    1

    Posted February 20th, 2009 19:00

    Thank you both very much.  I was able to do this and all of my files are intact.  I am backing up tonight just in case.  Some applications seem to be odd but that is not a big deal.  At least if my hard drive crashes soon I will have all my documents and pictures on an external hard drive.  Thanks for your patience in walking me through this.

    Tim

  • jackshack

    6447 Posts

    698

    1

    Posted February 21st, 2009 10:00

    It was our pleasure.  We're always glad when things work out well.

    Best of luck to you, and happy computing!

     

  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    478

    0

    Posted February 14th, 2009 21:00

    Welcome to the forums :emotion-21:

     

     

    Have you tried booting into Safe Mode?

     

    You could indeed use your friend's CD to do a 'Repair' install :emotion-55: 

    But you need to get onto Dell ASAP anyway, and request the missing discs... discs which you should've received with the system :emotion-43:

    There should've been a Media Direct CD, an OS disc, a 'Drivers & Utilities' disc, and a couple of program discs - one of which you did get, but there's usually a Roxio disc as well.

     

    Whatever it takes though... it's certainly not going to require a whole new PC :emotion-3:

    At worst, you'd only need to replace the hard drive.  But that's not going to be necessary either :emotion-5:

  • jackshack

    6447 Posts

    478

    0

    Posted February 14th, 2009 21:00

    I suspect your Dimension 9100 was shipped during the period that Dell was trying to minimize the amount of media going out with the computers.  You should definitely request the CD, either from Dell Tech support or if you are in the U.S. trying this form:  Dell Replacement Disks.  If you need to talk to Tech Support, explain you were never shipped the CD due to the Dell Media Reduction Program in effect at the time you ordered the computer.

    You can borrow a re-installation CD from a friend provided it is the same version of the OS that is specified by the COA on the side of your computer, and includes service pack 2.  One thing to keep in mind, however, is that the Windows XP installation CDs that were shipped with the Dimension 9100s had the SATA drivers slip streamed into the disk.  Windows XP re-installation CDs that were shipped with other models may not include these drivers, or may have drivers for an alternate version of the I/O hub.  The symptom you may observe is that the setup program fails to find any installed hard drives.  If you are simply trying to recover the specific file you mention, you can probably find a way to copy it from any Windows XP SP-2 CD, but if you need to perform a re-installation or a repair installation, you will need to remember the possible error report I described.

  • tndorr1

    7 Posts

    478

    0

    Posted February 15th, 2009 05:00

    Thank you.  I have requested the CDs from Dell but am not sure when they will arrive.  The only thing that came with the PC was a piece of paper that said "your new computer does not require an operating system CD or drivers CDs.  Instead, if you ever need to reinstall your software, use one of the following methods".  Neither method works if I can't boot up....

    When I get the CDs, should I be able to repair/replace the corrupted file or does it look like I lost everything on my hard drive and will require a complte OS install?  Any help in repairing this problem once I get the CDs would be appreciated.  Thank you.

  • jackshack

    6447 Posts

    478

    0

    Posted February 15th, 2009 09:00

    In order to use the restore partition, you do not need to boot into Windows.  I was assuming that you wanted to repair the existing installation, and to do that, you must have the Windows re-installation CD.  If you wish to abandon the attempt to repair, and instead restore the computer to factory delivered condition, you must do the following:

    Restart the computer

    During the latter part of POST (while the Dell logo is showing), press CTRL and F11; release both simultaneously before you see a message "Loading Descriptor for PBR-2..." just below a blue bar that appears after post at the top of the screen.  You have only about two seconds before the message appears, so you may need to try more than once.  There are some things that will disable this feature, so you may wish to make certain that you see the blue bar before trying.

    Choose to restore your computer to factory condition on the menu that should appear if you have successfully accessed the partition.  Bear in mind that this process will overwrite everything in your C partition, including any data you have stored.  Make certain you have saved anything you wish to keep to alternative media before trying it.

  • speedstep

    11 Legend

    •

    46969 Posts

    478

    0

    Posted February 15th, 2009 09:00

    Dell Customers can now request a set of backup discs containing the factory-installed operating system as well as the device drivers and utilities specific to your system.
     
    • Requests are limited to one (1) set of backup discs per system purchased.
    • The backup discs requested must match the operating system that was factory installed on the original order.
    Please note that Dell will provide you the most up to date Resource disc available, containing the latest drivers and diagnostic tools currently being shipped on new systems. Due to the frequent updates, this Resource disc may not have all the drivers needed for your specific system, especially if it is over one (1) year old.
     
    Additional Drivers and Downloads for your system can be found at  http://support.dell.com/support/downloads.
     
    If you are considering an operating system reinstall, please  click here for an alternative.
     
    To proceed with requesting these backup discs, please fill out the request form below and click  Submit to continue.
     
    Important Note:
     
    If you have a question about Enterprise (PowerEdge Servers, PowerVault Storage) product media, please complete the form at this link:  http://www.dell.com/enterpriseemail

     

     

    You can request a free set of backup disks directly from Dell by filling the form out located

    here: https://support.dell.com/support/topics/...

     https://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form

     

     

  • tndorr1

    7 Posts

    478

    0

    Posted February 15th, 2009 10:00

    I borrowed a XP Home Edition CD from my brother (his was from Gateway) and after attempting to boot got the message "Setup did not find any hard disk drives insatlled on your computer.  Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk related hardware configuration is correct.  This may involve running a manufacturer supplied diagnostic or set up program.  Setup cannot continue, to quit setup hit F3".  I ran a diagonistic on the hard drive and it appeared good.  Any thoughts?

  • jackshack

    6447 Posts

    478

    0

    Posted February 15th, 2009 17:00

    You may remember that I told you in my first post that this was a possibility if you used a CD intended for another computer.

    I have re-read the post and realized you are essentially missing a piece of the registry.  Microsoft has this advice on repairing a damaged registry:  Microsoft KB 307545.  Notice that it gives advice to avoid this method if you are attempting to use it on an OEM installed operating system.  The difficulty is that if there are special accounts on the operating system this procedure may disable the computer and thus force you to do a complete re-installation of Windows.  It also requires you to boot from a Windows installation CD.  Given this problem, I'm afraid you have no choice but to await arrival of the Windows installation CD from Dell. 

  • BELL BOY

    1145 Posts

    478

    0

    Posted February 15th, 2009 18:00

    Hi tndorr1

     

    Was ready to reply but got sidetracked (feeding time) & see JackShack has beat me to it   :emotion-9:

     

    Anyway here is my two cents

     

    You really should be using a Dell OEM type Windows XP disc that reflects the same version of preinstalled windows

    Even better if it’s the one that should have been supplied with your 9100, otherwise, yes you will have HDD recognition problems

    Dell is normally quick at supplying justified requests for backup OS & Resource discs

     

    Not always, but windows\system32\config\system error problems usually mean HDD (hard disk drive) problems, either bad sectors or HDD is heading south

    But if you have quote “ran diagnostics on the hard drive and it appeared good” then that’s a relief

     

    Otherwise (but still bad enough) it may just be windows corrupt registry hive(s) (5 off)

     

    Warning – only mention the following because you say quote “I can not get to the Recover Console”

     

    If you boot from an OEM Windows XP type disc, from Setup menu press the ENTER key to select the option “to set up Windows XP now” to proceed with Repair Install

     

    Do NOT press the letter R key to launch Recovery Console to repair Windows  :emotion-60:

     

    Using the Recovery Console to fix corrupt registry hive error will result in a password lockout problem & is associated with OEM SAM hive copy over process

    MS KB article 307545 procedures does include a warning not to use it for OEM (e.g. Dell) pre-installed operating systems