I am running Windows XP Media Center Edition 2002 Service Pack 2 on a Dell Dimension 8300 that I purchased new from Dell in 2004. Recently, the Standby button on the remote control has stopped functioning; when I press the button, my computer does not go into standby mode. The other buttons on the remote control function properly, and the standby button has only stopped functioning within the past week. I researched this issue on Microsoft's knowledge base, and they indicate this is an issue in Windows XP Media Center Edition 2005. They also provided a workaround, which consists of pressing another button on the remote control and then pressing the standby button. I tried their suggested workaround but it did not work.
As I understand from both Microsoft and Dell, the only way I can get a current version of Windows XP Media Center Edition is to purchase a new Media Center PC.
I would appreciate any feedback you might be able to provide so that I can resolve this problem.
Thanks,
George
Message Edited by gchale3rd on 02-21-2006 09:28 PM
'Standby' is notorious for eventually failing on many desktops, and I have yet to see a succesful workaround for this. It was designed for laptops to save battery power, I believe.
I have MCE 2005, and my remote does not even have a standby button. The only alternative suggestion is to set your hard drive and monotor to power down after a desired period of inactivity, in Control Panel>Power Options, and set the 'standby' option to 'never'.
Thanks for the input. I was unaware of the failings of 'standby' on desktops. I certainly don't use it very often. I just found it puzzling when it suddenly stopped functioning.
joe53
5 Journeyman
•
5772 Posts
•
17269 Points
387
0
Posted February 22nd, 2006 02:00
'Standby' is notorious for eventually failing on many desktops, and I have yet to see a succesful workaround for this. It was designed for laptops to save battery power, I believe.
I have MCE 2005, and my remote does not even have a standby button. The only alternative suggestion is to set your hard drive and monotor to power down after a desired period of inactivity, in Control Panel>Power Options, and set the 'standby' option to 'never'.