UNSOLVED
XPS 15 9570, E gpu code 43
I just got my xps 15 this week and im setting it up for gpu rendering, and I want to utilize both the internal gtx 1050 card and the egpu at the same time ( a razer core x with a titan X pascal card ). When I plug the egpu the internal card (1050 ) seems to crash or something.. and in device manager it says it has a code 43 error. Anyone here know how to fix this? I know other systems are able to run both. Im using C4D with octane and redshift. Thankyou
Hi,
I just found this link, very useful i must say, it said there that you need to disable your Nvidia GTX1050 first before able to use the 1080
https://www.windowscentral.com/razer-core-dell-xps-15-guide
I reckon you can't use two cards at the same time
jphughan
11 Legend
•
13985 Posts
•
79931 Points
2082
0
Posted February 26th, 2019 14:00
From some basic research reading threads on Egpu.io that I found by Googling "eGPU dGPU simultaneously", it seems that being unable to run both simultaneously is pretty common. This thread in particular mentions that you need to be able to use the same drivers for each GPU, so the fact that you're trying to run a GeForce 1050 and a Titan X at the same time (as opposed to something like a GeForce 1050 and GeForce 1080) could be the issue. If you've already got the latest drivers and firmware installed for various components (system, system TB3 controller, eGPU enclosure if applicable) and you're still encountering this issue, I don't think there's anything you're missing that would make this start working. You might simply be stuck with that particular GPU combination.