UNSOLVED
PW
PA.WOODCHUCK
2 Intern
•
24 Posts
0
2015
November 20th, 2021 05:00
Aurora R11, PXE boot issues
System froze and had to do reboot with holding power button. On restart I get PXE over IPv4 on MAC and had to press ESC to get system running again. I've had year long issue with losing BT (Bluetooth) connection which Dell fixed by replacing BT/network card(?). I need suggestions.
Thanks
1192
0
Posted November 21st, 2021 09:00
That was the fix, but will keep this post open for about a week. My question since I've never been in the BIOS... what/how was it changed?
1189
0
Posted November 21st, 2021 10:00
Those settings are saved in Vram. It is possible with a crash that the settings become modified.
As long as you know what they were you can always put it back.
There's no way that I know off to save or backup the bios settings in these systems, besides writing them down on a piece of paper or take screenshots with a phone.
Vanadiel
8 Professor
•
7087 Posts
•
29674 Points
1205
2
Posted November 20th, 2021 10:00
PXE is network boot. I am assuming you normally boot from SSD, so you will have to enter the bios and change the boot order to the default for device #1:
Boot order