UNSOLVED

Coolbreeze0608

updated

8 years ago

0

914

July 25th, 2018 22:00

Beep codes

My computer will power up but will repeatedly beep until I power it off again. It will not send an image to the monitor either. I believe the beep code is one but i don't know how to fix that are what i need to do. Please someone help me out here. Thanks 

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    806

    0

    Posted July 26th, 2018 03:00

    Without your specific model we can't say for sure.

    However, 1 beep in many Dell's is a System Board BIOS ROM Failure.  

    What happened before the problem?  Did you attempt to update the BIOS?  Have a power failure?

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 799

    0

    Posted July 26th, 2018 04:00

    Area 51 R2 is what I have. I am not sure what happened to cause this to happen. I have no idea what the BIOS is so I did not try to update it purposely. 

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    793

    0

    Posted July 26th, 2018 05:00

    None of the Dell documentation, that I found, has any beep codes listed so I have to assume the general beep codes apply.  

    Thus either a BIOS (setup) or general motherboard failure.  

    With the PC powered off, open the case and locate the CR2032 coin cell battery on the motherboard (this is for the CMOS memory/BIOS).  Remove the battery for at least 10 minutes.  Reinstall and power on, see if this helps or changes things.  If not, a motherboard failure is what I suspect. There is an outside chance the power supply is the problem but based on the 1 beep code its leaning to a motherboard.

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application