Solved!
Go to Solution17 R1, cooling fans question
Hi, I'm hoping this forum can answer my question. There are 2 cooling fans on my friends Alienware 17 R1. I understand one if for the GPU and one for the CPU. The CPU fan basically runs constantly and is rather loud. The GPU fan does not run at the same time. Is this normal? My friend had taken the laptop into a computer repair shop for a "tune-up" and they basically fouled things up. I can't find an adjustment for the fan speed on this laptop.
Should the GPU and CPU fans run at the same time?
Thanks for any information you can provide.
Hi @JArmst49 here is a YouTube example of a video for Alienware 17 (R1) disassembly, clean fan, clean CPU fan ventilation, and repaste CPU. Advocate watching a few YouTube videos and reading Alienware 17 Documentation, Owner's Manual in preparation. Clean and repaste GPU is similar process.
Having opened the laptop, clip electrostatic wrist band to metal part so that you are at the same electrostatic potential as the laptop (not shown in this video).
Best Thermal Paste for CPUs 2022: 90 Pastes Tested, Ranked | Tom's Hardware (tomshardware.com) Do not use Liquid metal compounds, they will destroy your motherboard.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
crimsom
9 Technologist
•
6114 Posts
1159
1
Posted August 12th, 2022 16:00
Hi @JArmst49 welcome to this free user to user Alienware laptop discussion forum. This is not Dell Support.
The CPU and GPU fans operate independently and in response to the Alienware Command Center (AWCC) FUSION tab performance settings. These cooling fans have thermistors that provide their local temperature so that their speed can be automatically controlled by the AWCC to remove excessive heat. The cooling system is reliant on the copper cooling pads being in thermal contact with their respective processing unit, and this potential air gap is filled with a thermal paste. The thermal paste requires frequent renewal.
If a fan constantly runs at high speed, repasting is usually required. The fan will need replacement when their thermistor has failed. There are many YouTube videos that show how to undertake system maintenance.
Please ask the Dell Community for any additional information.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]