Solved!
Go to Solutionhulbertmike
3 Posts
5113
1
Posted February 5th, 2015 12:00
Is this the simplest way to change the IP on an Avamar? Seems rather confusing for a simple change.
hulbertmike
3 Posts
5113
0
Posted February 5th, 2015 13:00
Thanks so much for the reply. I will give it a try.
JWeinsheimer
91 Posts
5113
0
Posted February 6th, 2015 05:00
It's also worth noting that the "latest" procedure isn't up to date and you'll likely encounter prompts or output that aren't documented in the proc.
ionthegeek
2 Intern
•
2049 Posts
2664
1
Posted February 6th, 2015 07:00
The post-install networking document is intended for tasks like configuring additional VLANs. It is not intended to cover the (relatively simple) re-IP case.
Avamar Exorcist
462 Posts
5092
0
Posted March 22nd, 2010 04:00
First of all, reverse the changes you made to the system.
When the system is working again you can change the network configuration depending on what type of Avamar system it is:-
For a Single node system you can use the 'resite' procedure documented in the Avamar system administration guide.
For a multi-node system use the document "Changing the Name and IP Addressing of Avamar Systems Avamar 3.7.1 or Later Technical Note" found on Powerlink in Home > Support > Technical Documentation and Advisories > Software ~ A-B ~ Documentation > Avamar > Technical Notes