UNSOLVED
B
Byron_Tory
3 Posts
0
519
April 18th, 2011 15:00
CIFS shares on multiple fsn interfaces possible?
I've got two subnets. I want to share files from the Celerra server to any client on either subnet. I've attempted to set up a second fsn interface using cge2 and cge3. I've checked the box on the virtual server to use it, and it says the interface is "up", but when I look at the Devices tab under Network it shows that cge0 is "(active,primary)" for fsn0 but cge2 is "(primary)" but not active on fsn1
What am I missing?
Byron_Tory
3 Posts
343
0
Posted April 19th, 2011 08:00
server_2 : Virtual devices: fsn1 active=NONE primary=cge2 standby=cge3 fsn0 active=cge0 primary=cge0 standby=cge1 fsn failsafe nic devices : fsn0 fsn1 trk trunking devices :
Byron_Tory
3 Posts
343
0
Posted April 19th, 2011 10:00
Should have checked the hardware connections earlier... with my glasses on. Thanks anyway.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
343
0
Posted April 18th, 2011 21:00
can you post output from this command:
server_sysconfig server_X -virtual