UNSOLVED
D
Dhakshinamoorthy
2 Intern
•
174 Posts
1
1218
July 9th, 2013 16:00
EMC "System time was changed" Alerts
Hi All,
Nowadays we are receiving lot of alert mails related to system time was changed. Is there any user action required for this alert? Which time was changed?
Please suggest me on this notification mail.
******************************************************************************************************************************************************************************************
"Time Stamp 07/01/13 20:20:07 (GMT) Event Number 4666 Severity Information Host SAN-1 Storage Array "Serial No" SP N/A Device N/A Description The system time was changed."
Process ID: 9416
Process Name: C:\EMC\ManagementServer\7.30.13.0.99.1\ECOMCIMOM\bin\system\NAVICIMOM.exe
Primary User Name: SAN-1$
Primary Domain: WORKGROUP
Primary Logon ID: (0x0,0x3E7)
******************************************************************************************************************************************************************************************
Dhakshinamoorthy
2 Intern
•
174 Posts
388
0
Posted July 17th, 2013 01:00
Vipin,
We are getting alerts for Clariion CX4-120. (no control station!!!!)
Rainer_EMC
6 Operator
•
8645 Posts
388
0
Posted July 17th, 2013 01:00
Then I would suggest you move your question to the Clariion support forum
Vipin VK
2 Intern
•
812 Posts
388
0
Posted July 10th, 2013 00:00
I think this time you forgot to start the discussion in Celerra Support Forum .You may still move this discussion to the right forum (From Actions > Move )
If you are running NAS Code 5.6 (and your SPs are in sync with NTP ) you may expect this error as the SP time is not getting synced with the CS (as per primus) . You may try searching this error in support.emc.com, you will find a primus solution.
This issue is resolved in NAS Code 6.0.