UNSOLVED
Windows 8 Consumer Preview
As it is now avaliable, i thought i'd test out what in our environment works and what doesn't and it seems Celerra access doesn't I seem to get an access is denied message to all CIFS shares. Wondered if anyone else had tried this out yet? Running DART 6.0.51-6
Rainer_EMC
6 Operator
•
8645 Posts
1015
0
Posted March 2nd, 2012 05:00
If you want a chance to work with Windows beta software you need to at least use the latest Celerra release – your DART version is almost a year old – we are now at 6.0.55.3
I think I have a better solution than upgrading your DART version. Disable SMB 2.2 (really 2.anything) on your Windows 8 client. This allows you to leave your EMC stuff alone yet still do your testing. This is relatiively easy to do:
Start a command prompt as an Administrator
From the command prompt, type:sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
Reboot and you're good to go!
SAMEERK1
296 Posts
1015
0
Posted March 1st, 2012 06:00
Hi,
i had the same problem in my test environment, and i got it resolved by changing the ownership of the share.
i was able to add the user permission as well once i changed the ownership of the share. Make sure you have added your account in the Cifs server local administrator group if its enabled.
Sameer Kulkarni