UNSOLVED

dgphotog

updated

6 years ago

D

dgphotog

2 Posts

0

1332

October 27th, 2020 11:00

Exceeding max RAM

I'm trying to help my brother-in-law upgrade his RAM with a chip I took out of my computer. He's got a Dell M2800 CTO. The specs imply that 8GB is the max but he's got 4GB, SoDIMM/1600MHz in one slot and an open slot. The chip I have is 16GB, SoDIMM/2666MHz. So my question is can he use my RAM?

  • U2CAMEB4ME

    6 Operator

    6245 Posts

    1126

    0

    Posted October 27th, 2020 12:00

    Table 3. Memory
    FEATURE SPECIFICATION
    Memory connector Two SODIMM slots
    Memory capacity 4 GB or 8 GB
    Memory type DDR3L SDRAM (1600 MHz)
    Minimum memory 4 GB
    Maximum memory 16 GB

     

    https://www.dell.com/support/manuals/en-us/precision-m2800-workstation/dellprecisionm2800_om-v1/technical-specifications?guid=guid-a5e695f5-4a5d-4e8d-a739-8adf87e15ff4&lang=en-us

    Regards,

    U2

  • dgphotog

    2 Posts

    1132

    0

    Posted October 27th, 2020 12:00

    He's in MI and I'm in CT. I don't think he's every upgraded a laptop, but I'm willing to talk him through it long distance.

    New question:

    What is the worst that could happen if the max system RAM is exceeded by 12GB? I will abandon the idea if there's no conclusive answer to that, or if the motherboard could be damaged.

  • ejn63

    12 Elder

    31423 Posts

    154996 Points

    1129

    0

    Posted October 27th, 2020 12:00

    The system will work with either DDR3 or DDR3L memory, so unless it's damaged by a static shock (unplug and disconnect the battery before installing), worst case is the system will fail to POST with the RAM installed.

     

  • ejn63

    12 Elder

    31423 Posts

    154996 Points

    1137

    1

    Posted October 27th, 2020 12:00

    You can only try, but it's not supported - this system is 8G/slot max.

     

  • U2CAMEB4ME

    6 Operator

    6245 Posts

    1127

    0

    Posted October 27th, 2020 12:00

    Welcome to the Dell Community @dgphotog 

    The M2800 takes DDR3L!!!

    What type are you trying to use???

    Is it DDR4???

    If so then it will not fit.

    Best regards,

    U2