UNSOLVED

Skydan

updated

17 years ago

S

Skydan

13 Posts

0

44138

February 26th, 2010 02:00

Hot swap SSD?

Hello,

I was wondering if this SSD would be compatable with the hot swap bays on the side of my area 51 desktop?

 

http://www.amazon.co.uk/Kingston-Technology-128GB-SSDNow-Desktop/dp/B002BH3UDY/ref=sr_1_2?ie=UTF8&s=electronics&qid=1267177290&sr=8-2

 

Would be grateful for any response, thankyou!

 

 

  • jay2010

    1 Rookie

    58 Posts

    626

    0

    Posted March 8th, 2010 10:00

    Are the hot swap bays accessible from the outside of the case?  Or do you need to pop the panel off?

  • Skydan

    13 Posts

    626

    0

    Posted February 27th, 2010 03:00

    Any clue on this guys? Would greatly appreciate it.

  • Skydan

    13 Posts

    626

    0

    Posted March 8th, 2010 11:00

    You need to open the side panel to access the bays, there are 6 of them in all.

  • fishnbanjo

    261 Posts

    626

    0

    Posted March 8th, 2010 17:00

    Let me preface this by stating I do NOT have an Aurora PC but having said that I DO have 2 PC's with SSD's, my Studio XPS 435T/9100 has a 256Gb SSD in a quick disconnect enclosure in one of the Floppy Drive Bays that I installed and my Alienware M17x has a 128Gb SSD in the HDD1 bay internally. Each of these drives is handled by Windows 7 Hardware Remove/Eject Wizard so I'd say your SSD is as well and can be told to eject then you could remove each and swap them which would initialize them immediately by the OS. 

  • johnoII

    1 Message

    626

    0

    Posted December 30th, 2013 22:00