UNSOLVED

jasonbgreer

updated

17 years ago

0

1414818

April 16th, 2009 10:00

Inspiron E1405 Hard Drive Error Code 2000-0146

On the start-up diagonstic the error code 2000-0146 came up. The computer is booting fine, though sometimes does not shuts down properly. Should I look into getting a new hard drive right now. Is it going bad? Is there anything else that could be wrong? Thanks.

  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    7189

    0

    Posted April 16th, 2009 10:00

    The drive electronics are failing the self-test - yes, replace the drive ASAP.

     

  • 7189

    0

    Posted April 16th, 2009 11:00

    Do I need to buy a Dell E1405 hard drive or can I purchase any laptop hard drive?

  • 7189

    1

    Posted April 16th, 2009 11:00

    Does it need to be a Dell hard drive or can I get any laptop hard drive?

  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    7189

    0

    Posted April 16th, 2009 14:00

    Any 2.5" 9.5 mm SATA notebook  drive will work.

  • mhayden31419

    1 Message

    7189

    0

    Posted May 6th, 2009 16:00

    I also received that error, but the hard drive was failing because the bios settings had somehow changed so it wasn't reading the drive properly.  The bios setting had been changed from a SATA drive to an AHCI sata.  I changed the settings, deleted all partitions and started from scratch.  It's been running just fine ever since. 

  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    7189

    0

    Posted May 6th, 2009 17:00

    You may have temporarily resuscitated the drive, but keep backups. 

     

  • 7189

    0

    Posted May 22nd, 2009 17:00

    Hi,

     

    I have been unable to boot my laptop in window. Could you tell how can one check the BIOS setting and change it.

     

    Thanks,

     

    Saeer

  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    7104

    0

    Posted May 22nd, 2009 17:00

    F2 at powerup to get into the BIOS;  F12 gets you to the menu that brings up the Dell diagnostics.

     

  • FTLOSM

    26 Posts

    7105

    0

    Posted March 25th, 2010 23:00

    I found this thread searching 2000-0146 error code, i went into my bios and saw i too was set to ahci vs ata, i have a new wd hd due to dell diagnostics telling me the original hd was bad (same error code), and yet the brand new drive gives same error code in dell diagnostics!

     

    So decided to search a bit, found this thread, and saw the talk about the settings of ahci to ata in bios.

     

    Went in and changed mine to ata - saved/exited and am going to now delete the partition, reinstall vista and drivers and see if this works, will also re run the diagnostic tests too to see if it still gives me that same code again.

    Interestingly i took the new drive out and hooked it upto my main pc, installed the western digital lifeguard diagnostics and ran it for 6 hrs extended test, drive shows as pass and healthy, so makes me wonder why dell diag is showing it as error 2000-0146, maybe it is that bios settting - sure hope so will report back once i get the reinstall and re testing done...

    Man i hope this fixes it...

  • FTLOSM

    26 Posts

    1908

    1

    Posted March 26th, 2010 09:00

    Didnt fix it like i hoped, this is a new drive from dell (wd 500gb) but heck guess it could be a bad one just seems odd for a new drive to be bad what are the odds maybe less than 3% im guessing?  Maybe the motherboard has something funky going on heck i dunno but still getting that 2000-0146 error code every time i test the drive in dells diagnostics mode..