UNSOLVED

missyang

updated

19 years ago

M

missyang

32 Posts

0

974

September 6th, 2007 23:00

Bootstrap Backup in Clustered Server

Hi guys,

I have two HP-UX hosts as clustered NW servers. There's also a dedicate storage node. They're all connected to a tape library L700new. Is that possible to back up the bootstrap to tape instead of some file device on the servers?

Thanks for the help.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    333

    0

    Posted September 7th, 2007 00:00

    What version is that? I do remember I had to use this on active node due to some documented issues which were supposed to be fixed in 7.3SP3 (meaning in that version -s should no longer be required). NW server will then see local devices as local to backup server.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    333

    0

    Posted September 7th, 2007 00:00

    Hmm... I had 7.2.2 for short time on HPUX, but I can't remember how it was there. But it should still work. Of course, your script should take care library in such manner that you do jbconfig upon failover on active node - that should address your issue no matter on which node your package is running.
  • missyang

    32 Posts

    333

    0

    Posted September 7th, 2007 00:00

    Since I used 'jbconfig -s virtual_host' to configure that tape library, the jukebox is recognised as a remote device and no bootstrap is backed up... So I had to set up a file device to achieve it. So I have to connect each NW server with a standalone device to back up the bootstrap?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    333

    0

    Posted September 7th, 2007 00:00

    Yes, that should work without any issues.
  • missyang

    32 Posts

    333

    0

    Posted September 7th, 2007 00:00

    Unfortunately, our NW is 7.2.2jumbo... so it's hopeless to achieve it now? And if we upgrated it to 7.3.3, it'd be resolved automatically?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    333

    0

    Posted September 7th, 2007 01:00

    Do you have 1 or two jukoboxes? (it sounds as one)
  • missyang

    32 Posts

    333

    0

    Posted September 7th, 2007 01:00

    What I do to configure jb:

    1. the virtual service networker is running on server1
    2. on server2, run jbconfig -s networker
    3. three paths for each drive - two servers, one dedicate storage node

    Then in the resource file, I have:
    rd=server1:/dev/rmt/...
    rd=server2:/dev/rmt/...
    rd=dsn:/dev/rmt/...

    When I set server1 active, the resource file becomes like:
    rd=server1:/dev/rmt/...
    rd=server1:/dev/rmt/...
    rd=dsn:/dev/rmt/...

    When I set server2 active, it's like:
    rd=server2:/dev/rmt/...
    rd=server2:/dev/rmt/...
    rd=dsn:/dev/rmt/...
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    333

    0

    Posted September 7th, 2007 01:00

    In my case 3 libraries on each side and active nodes always run script which:
    a) on local node calls jbconfig -s package_name
    b) via ssh executes jbconfig -s package_name on remote node

    Those devices which are local to node where package is running are always local. -s for local node I had to implement because of documented issue in NW - I think with 7.2.2 everything is fine so try jbconfig without -s for local node - that should create devices local to active node.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    311

    0

    Posted September 7th, 2007 02:00

    Your server should not be shown as physical name, but rather as package name - that's one of the features your get with metro cluster. Perhaps something is wrong with your configuration files. Make sure you did follow instructions for cluster installation of NW step by step.
  • missyang

    32 Posts

    311

    0

    Posted September 7th, 2007 02:00

    I didn't state correctly. When running nwadmin, the server is the package name, but the user shown on the top right conner is root@server1. And when using jbconfig -s package_name, it says '.... name must match'. I'm wondering if that's why.