Actually, we have one NAS filer connecting to the backup server.

How can we re-direct the recover to different NAS filer as destination?

Yes, you can do a directed recovery to the exsisting NAS box.

If you are using 'nsrndmp_recover' command to recover the data, then use this switch '-R nas_filer_name'.

–R recover-target

This option specifies the name of the destination host the data will be recovered to.

Regards,

Prajith

Refer to NetWorker command reference guide for more information.

http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-011-695.pdf

Regards,

Prajith

Hi,

There was an error while using 'nsrndmp_recover' command as following:

nsrndmp_recover -s sngbku -c emc-fs1 -S 2946788361 -m /vol/ProdArchive/restore -R ntpnas

42795:nsrndmp_recover: Performing recover from Non-NDMP type of device

42769:nsrndmp_recover: Listening Portno not found, DSA might have died

42871:nsrndmp_recover: Error during File NDMP Extraction.

42840:nsrndmp_recover: NDMP recover failed.

42880:nsrndmp_recover: Error during NDMP recover

Regards,

SH

If we want to recover data from old tapes, is there have any recommended service provider to provide the data recovery service?

Regards,

SH

Hi,

Same errors when recover data using GUI.

Regards,

SH

Hi,

You means it might not work if recover data from different type of NAS client (from EMC Celerra to Netapp NAS)?

Any solutions to recover data cross platform?

Regards,

SH

42795:nsrndmp_recover: Performing recover from Non-NDMP type of device

As per this error message it looks like destination machine is not a NAS client. Please confirm if its a NAS client.

Also is these NAS clients of same type. I mean both EMC Celerra or both NetApp NAS.

If its not of same type then it mgiht not work.

Cross platform recoveries of NDMP backups is not supported.

Regards,

Prajith

Hi,

The command that you have mentioned above to perform NDMP restores is not correct. Below is the correct syntax. Replace the targer_client with the destination host name and source_path with the actual file/folder name that you wish to restore. Ensure that this destination host has a client instance in Networker configuration and that you are successfully able to run inquire -N NDMP_host, after supplying the NDMP login credentials.

nsrndmp_recover -s sngbku -c emc-fs1 -S 2946788361 -m target_client::/vol/ProdArchive/restore source_path

You may use this command to perform all NDMP restores from tapes, irrespective of whether they are browsable or not.