UNSOLVED
2748 + VLAN Basics
I'm configuring a small company network as such:
Internet -> T1 router -> PE700/Linux Firewall -> PC2748 Switch -> Servers/Desktops/Printers
The firewall has 2 interfaces: eth0 with a public IP + eth1 with 192.168.1.1
The firewall will also do basic internal DNS.
I only have this 1 firewall to work with.
I want to set up 2 VLANS:
1 - 192.168.1.x range for desktops + printers
2 - 192.168.2.x range for publicly available servers
In this case, would VLAN2 be considered a DMZ? If not, do I need to connect another switch to the firewall and act as a DMZ?
bh1633
909 Posts
205
0
Posted April 30th, 2008 13:00
You can do this with a single switch. Put half the ports in vlan 1 and half the ports in vlan 2 and the vlans will not be able to communicate with eachother through the switch.