Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
spanning tree design
we have two separate network with each with its separate firewall. one network has Dell N4064 switch and other network has failover setup with two PC6224 switch.help setup spanning tree setup.
wanted to keep N4064 switch as root for one network and setup spanning tree root for PC6224 for its own network. please help.
|
I have already connected this two network with RSTP and N4064 is set as root switch, i know i do get issue once while and our network goes down for some time 10 second and come backup. it is possible to do this change while both network in production? also PC6224 are in fail-over mode too. so do you think i need to setup VRRP ?
DELL-Josh Cr
Community Manager
•
9733 Posts
•
44221 Points
754
0
Posted August 6th, 2018 10:00
Hi,
You can configure multiple spanning tree and do it on a port basis. https://www.dell.com/downloads/global/products/pwcnt/en/pwcnt_MSTP_interoperability.pdf