UNSOLVED

DraganK

updated

21 years ago

D

DraganK

1 Rookie

36 Posts

0

6255

March 8th, 2005 06:00

PE2600 RAID Battery Needs Replacement

Hello,

 

I have four PowerEdge 2600 servers with a same problem.

 

Properties on my RAID Perc 4/Di controller show the message "Battery Needs Replacement"

It was very strange for me that I had same message on four servers simultaneously and there was no any warning in logs. So, I did system update (BIOS, Firmware, RAID Firmware and driver) on the last release, but the problem stayed.

I tried to replace RAID battery on two of the four servers but without any results.

 

I don't believe that the RAID battery is a problem (I check the voltage on old battery, it's OK), but I want to eliminate that message.

 

Need Advice


Dragan

  • 147

    0

    Posted May 19th, 2005 09:00

    Yes

    I had the same problem.

    Had to get the dell engineer to replace the motherboard eventually. Now I have another poweredge 2600 stating that it requires a new battery.

    I had updated all the firmware and array software on all my servers when I got the first problem on the previous server and it still didn't resolve the problem. This server was fine at the time with the updated software, but now it wants a replacement battery. Talking to dell right now but luckily I am still under warranty and I will just replace the motherboard.

    I will reply if they have any feedback.
  • DraganK

    1 Rookie

    36 Posts

    147

    0

    Posted May 19th, 2005 10:00

    Steven,

    Dragan again.

    Some later, I replaced the MB on one of the servers, but the batery problem stayed. I had a some other problems on that server, so I did the reinstallation of W2K3 OS.

    Very strange, but after that (OS reinstallation) the batery problem disappeared. I'd like to notice that I did the reinstallation on server with a new MB.

    I still have a problem on the other servers. I'm not sure that I'll be able to do same on some other servers.

    I find document about ROMB and PE2600 problems also, but I can't find it now.

    Regards

    If you have any other experience please reply

  • 147

    0

    Posted May 19th, 2005 14:00

    It seems as if the SP1 for windows 2003 server is not exactly compatible with open array manager. Microsoft are working on a patch and it should be ready for the end of the month so i am just going to wait for the results of the patch as I sure my battery is fine.