Hi Mickiesdog,

Are you able to print?

Please check if you get any error message on printer screen.

You may try to scan a standalone copy from printer control panel and see if the issue persists. If the issue persists, you may perform a printer reset. 

Note: Printer reset will reset the printer to default settings and incase there are any fax or printer customized settings, they will be deleted. 

Resetting to Factory Settings:  

1. From the printer control panel, press Settings button.
2. Press the arrow buttons to scroll to Default option, and then press OK.
3. Press the arrow buttons to scroll to Set Defaults option, and then press OK.
4. Press the arrow buttons to scroll to Use Factory option, and then press OK.
5. When prompted to set the Initial Settings of your printer, make your selections using the printer control panel buttons.
6. Once it is reset, Initial Setup Complete message appears on the display.
    

If you are able to scan to computer from printer, you may try to disable the firewall of computer and see if it makes any difference. You may also check the printer manual from link: http://bit.ly/Y8aCzp It has some troubleshooting steps that might help.

Please share the findings. 

thanks Dell Chinmay S . I did manage to get an RTF scan by the printer Control Panel. I then found I couldn't print but there was no error message. I attempted to do the printer reset as per your instructions but it became apparent that there was no Wi-Fi connectivity for some reason. I then went to the printer Control Panel to reset Wi-Fi but I'm a bit stuck because I'm not sure I have the right Dell installation cable, and even with another one, I can't work out where the non-USB end of the cable is supposed to go on the printer. The diagram supplied on the wireless setup utility screen  bears no resemblance to my printer.

Hi Rock Star Rick,

the Wi-Fi symbol on the printer is definitely Orange.

I followed all your instructions – got as far as "Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power."

Couldn't see anything called "Wireless adapter". I did however discover that somehow my private home network had been redesignated a public network, so I changed that.

Any further advice?

Mickie's dog

Mickiesdog,

Please continue with DELL-Chinmay S, long night ahead, snow and work. :emotion-9:

Printer wireless? If you power on the printer, is the WiFi light green?

Try running Delete Print Jobs to remove stuck print job(s) from the queue, then restart your computer.

Try reading...

Update list of applications to send scans to

Then try these tweaks...

Start, control panel, device manager.

Go to the USB Controller section and click the + sign.

Go to each USB Root Hub and right click on it, left click properties, left click power management. Uncheck the box, allow computer to turn off this device to save power.

Restart your computer.

--------------------------------------

Start, control panel, device manager. Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.

Rick

Mickiesdog,

Your printer is not communicating with your wireless router.

Power off your ISP modem/router and your wireless router(if any) for 30 seconds. Then power on the ISP modem/router. Wait 15 seconds, then power on the wireless router(if any)

Restart the computer and try to connect.

Unplug the printer from the wall for 30 seconds, then plug it back in. What color is the WiFi Light, orange or green?

Rick

Still orange

have to go out now, will later. thx

Mickiesdog,

Run Network Interface and post the information back here.

Rick

Mickiesdog,

I have to get some rest and work a long night, so DELL-Chinmay S will help you get the printer connected to your network.

How to login to your wireless router use these Recommended Wireless Router Settings I use channel 11. I would make a new SSID to make connecting easier.

Run Delete Print Jobs to remove any stuck print jobs from the queue.

Make sure the pritner is not usb cable connected.

Start, control panel, programs and features, Dell V715w Printer, uninstall.

Restart your computer. Make sure the printer was removed. Manual Printer Driver Removal

With the computer online, insert the Dell V715w Printer disk, choose new installation, network and follow the instructions. It should ask for your network name and password, then follow the instructions. When you are prompted to disconnect the printer, the WiFi light should be green.

Remember virus programs and firewalls will block communications.

Make sure to Update list of applications to send scans to

Any questions, DELL-Chinmay S will help you as I probably won't be back online until late tomorrow evening.

Rick

here is the interface info as requested

There is 1 interface on the system:

   Name                   : Wireless Network Connection 2

   Description            : D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2)

   GUID                   : a1fbf8a6-2c69-40ba-931c-cb812676c056

   Physical address       : 1c:7e:e5:5c:1c:7d

   State                  : connected

   SSID                   : BigPond671E5B

   BSSID                  : 58:98:35:67:1e:5b

   Network type           : Infrastructure

   Radio type             : 802.11g

   Authentication         : WPA2-Personal

   Cipher                 : CCMP

   Connection mode        : Auto Connect

   Channel                : 1

   Receive rate (Mbps)    : 65

   Transmit rate (Mbps)   : 65

   Signal                 : 90%

   Profile                : BigPond671E5B

   Hosted network status  : Not started