UNSOLVED
K
kiteboarder1
23 Posts
0
32015
January 31st, 2006 00:00
RUNDLL Error on boot
XPS600
Only get this message when I install my Dell 964 on the Dell 3300 wireless adapter:
Error in C:\windows\system32\spool\drivers\w32x86\3\dlcjtime.dll
missing entry rundll entry
uninstall printer--leave 3300 installed/connected ---no error
install printer via usb---no error 3300 still connected
everything works fine
This error is annoying! Please help
Thanks
Ryan
Message Edited by kiteboarder1 on 01-30-2006 08:04 PM
kiteboarder1
23 Posts
565
0
Posted January 31st, 2006 17:00
That did it!
Thank you
- Well, I followed the instructions (deleting the registry entry) and it did the job until I re connected the printer (Dell 964)... have the same error againg...error in c:\windows\system32\spool\drivers\w32x86\3\dlcjtime.dll missing entry: runddll entryso... what's next...? I tried to reinstall the 964 drivers from the Dell site but didn't work, the 'self installing drivers update' didn't work... tried several times, rebooting each time, no change... same error after using the printer...nevertheless I can't find anything else NOT working properly, besides the annoying error every time I boot the machine...any suggestions?I.
sleeplesman
272 Posts
565
0
Posted February 6th, 2006 15:00
check your msconfig in the startup, winini, autoexec.bat,config.sys for any entry refering to this dll file.uncheck it and see what happens.sleeplesman
272 Posts
565
0
Posted February 6th, 2006 21:00
ok.. try this.
put the xp cd in the cd rom drive
go to start run and type in cmd
at the c promt
Type in these commands (Press enter after each command)
x: (Where "x" is the CDROM drive letter)
cd i386
expand dlcjtime.dl_c:\windows\system32\spool\drivers\w32x86\3\
(should see a prompt that shows the file expanding)
(underscore at end of file name = compressed file)
You can also run a copy command like so -
copy dlcjtime.dl_c:\windows\system32\spool\drivers\w32x86\3\
this should extract, or expand the given fil to the proper location. then reboot.- thanks again...the dlcjtime.dl_ was not included in the XPprof disk nor in the drivers disk provided by Dell upon request when I bought this new 9150...that file was in the photo 964 printer cd...nevertheless, I did follow you kind suggestion but still the same error...for some reason it gets back into the registry...ohhhh windows.... so much time for nothing...I really appreciate your help,any other thought?I.
sleeplesman
272 Posts
565
0
Posted February 7th, 2006 17:00
try a search for the file on all the cd,s needed. copy it to the folder listed. if you find a file with the same name but dl_ just rename it to dll.
you might even do a search for it on linekiteboarder1
23 Posts
566
0
Posted February 12th, 2006 21:00
Just curious if that worked for Ellegy.
I've got the RUNDLL error still on every boot.
Nothing worked for me yet
Thankssleeplesman
272 Posts
477
0
Posted February 13th, 2006 00:00
try turning off your power management in both the bios and in the control panel. see if this gets rid of the rundll error. power management can cause this error. Again. check your msconfig and look for somthing calling for rundll. uncheck it and see if this gets rid of the error. the startup in msconfig will show what is calling for the file if the problem is called from there. Have you updated your virus software? this file is prone to virus attacks as well.
sleeplesman
272 Posts
565
0
Posted January 31st, 2006 14:00
Open regedit and search for dlcjtime.dll.
Find a value named DLCJCATS in \HKEY_LOCAL_MACHINE\...\CurrentVersion\Run\.
Make a safety Backup of the selected registry folder.
Delete value named DLCJCATS!
this is a fix from dell technician from a phone call.