Solved!
Go to Solution684
0
Posted February 24th, 2013 21:00
not part of a storage group ?
684
0
Posted February 24th, 2013 22:00
I have 2 hosts that is using the same wwns. ~management is actuall a old host that I am trying to delete. how can i delete this host without affecting the new host using the same wwn?
684
0
Posted February 25th, 2013 03:00
Just as Dynamox mentioned, these are not part of any storage group. It seems you have logged in with 'engineering mode' enabled.
If you want to hide ~management, you can just disable engineering mode. Or if you don't want to use this initiators, you can de-register them.
684
0
Posted February 25th, 2013 08:00
on one of my host in vsphere, I am seeing 8 paths to the lun and showins 4 (active I/O)
but on another host, it only shows 4 paths to the lun and all paths show (active I/O)
I changed all hosts to failovr mode 4 and thy are using round robin.
any idea why this one particular hosts is only showing 4 paths and not 8?
In navisphere, under connection status, it does show all 8 paths
684
0
Posted February 25th, 2013 09:00
What is the failover mode set for that host in Clariion ? With mode set to 1 you may expect this .
684
0
Posted February 25th, 2013 09:00
nice. that fixed it. I did replace a vhba on this server. Thank you dynamox
dynamox
11 Legend
•
20419 Posts
•
87439 Points
684
0
Posted February 25th, 2013 09:00
it typically happens when you replace an HBA, it needs to be reconnected to the host. Right click on the storage group and go into properties, Hosts tab. Cntrl+Shift+F12 (enter engineering mode password) and then click on the host and add a check mark next to the new paths.