In bios, is your hdd set to ata or ahci mode?

A couple of things come to mind:

• Does your system indeed have SATA drives, or does it have SCSI drives?  The 380 could be configured with either.  If SCSI, then you would need drivers for the Adaptec controller they are connected to.  If SATA,  you are on the right track.
• You posted the Version.txt file in your post, so I'm just assuming that you extracted all 9 files and put them on your floppy disk (?).  Did you also "Unblock" the file upon downloading it (right-click file, Properties, Unblock). 
• Did you get an error message?  Or did it simply seem to work, just to not find any drives at the end.
• When loading the driver at F6, Windows might try to tell you that it already has a driver you can use, causing you to hit a different key to use the driver on the floppy - I get caught there if I'm not paying attention - make sure you choose to use the driver on the floppy rather than the default option to continue with the driver Windows already has.
• Have you tried nLiteOS.com?

If it were me, I would use nLite to integrate the drivers into your installation media, creating a new install disk (just remember in doing so to select Multiple Driver files and select all drivers presented, then choose TextMode Drivers).

I meant to ask the same as bac ...

The system was eqipment with SCSI, howerver i have removed them and the SCSI 320 card.

ther was no problemes addin the file on a disk, and pressin F6 durin the installation of windows xp, ther it comes up 4 avaible drivers.

iaStor_ICH8R = "Intel(R) ICH8R/DO/DH SATA RAID Controller (Desktop ICH8R)"

iaAHCI_ICH8R = "Intel(R) ICH8R/DO/DH SATA AHCI Controller (Desktop ICH8R)"

iaStor_ESB2 = "Intel(R) 631xESB/632xESB SATA RAID Controller (Server/Workstation ESB2)"

iaAHCI_ESB2 = "Intel(R) 631xESB/632xESB SATA AHCI Controller (Server/Workstation ESB2)"

I am readin this from file -> txtsetup.oem

however the file contain all this drivers

iaStor_ICH8R = "Intel(R) ICH8R/DO/DH SATA RAID Controller (Desktop ICH8R)"

iaAHCI_ICH8R = "Intel(R) ICH8R/DO/DH SATA AHCI Controller (Desktop ICH8R)"

iaStor_ESB2 = "Intel(R) 631xESB/632xESB SATA RAID Controller (Server/Workstation ESB2)"

iaAHCI_ESB2 = "Intel(R) 631xESB/632xESB SATA AHCI Controller (Server/Workstation ESB2)"

iaStor_ICH7MDH = "Intel(R) 82801GHM SATA RAID Controller (Mobile ICH7MR/DH)"

iaStor_ICH7DH = "Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)"

iaAHCI_ICH7R = "Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)"

iaAHCI_ICH7M = "Intel(R) 82801GBM SATA AHCI Controller (Mobile  ICH7M/DH)"

iaStor_ICH6R = "Intel(R) 82801FR SATA RAID Controller (Desktop ICH6R)"

iaAHCI_ICH6R = "Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R)"

iaAHCI_ICH6M = "Intel(R) 82801FBM SATA AHCI Controller (Mobile  ICH6M)"

The rest drives should be shown in windows add drives installation, but does not, and i found the drives i am lookin for. (what i belive to be the drives for the system incording to windows vista)

iaAHCI_ICH7R = "Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)"

This one,, but this drives does not show from the disk....so i think ther is a BUG from Dell....

anyone want go to out with me and do the same and see if u get 4 drives or the hole list of 11 drives

if more people get like me then it is defently some bug and dell must fix the file

OLD message

A couple of things come to mind:

   Does your system indeed have SATA drives, or does it have SCSI drives?  The 380 could be configured with either.  If SCSI, then you would need drivers for the Adaptec controller they are connected to.  If SATA,  you are on the right track.

   You posted the Version.txt file in your post, so I'm just assuming that you extracted all 9 files and put them on your floppy disk (?).  Did you also "Unblock" the file upon downloading it (right-click file, Properties, Unblock).

   Did you get an error message?  Or did it simply seem to work, just to not find any drives at the end.

   When loading the driver at F6, Windows might try to tell you that it already has a driver you can use, causing you to hit a different key to use the driver on the floppy - I get caught there if I'm not paying attention - make sure you choose to use the driver on the floppy rather than the default option to continue with the driver Windows already has.

   Have you tried nLiteOS.com?

If it were me, I would use nLite to integrate the drivers into your installation media, creating a new install disk (just remember in doing so to select Multiple Driver files and select all drivers presented, then choose TextMode Drivers).

Good question, i am not sure, i only know that the SATA raid is set to automatic detect raid, maybe wrong "window" in bios?

Well, I doubt that there is a problem with the file, but assuming there is something wrong with the file, you could always try an older version ... there is almost zero chance that both would be bad:

Another option would be to get the driver for the Intel 955X Express chipset directly from Intel (this usually works exactly the same, but depending on the system requirements per the OEM, it is possible that it won't work):

downloadcenter.intel.com/Detail_Desc.aspx*&DownloadType=Drivers

Another thought ... what Service Pack does  your XP CD have on it?  I wouldn't even try this with less than SP2 - the latest driver may have a minimum requirement for the SP level.  You can use nLite to integrate Service Packs if it is not at least SP2 ... and I would still use nLite to integrate the driver.

I would try it with you, but i do not have a 380 to try it with.

You dont need a 380 in order to see if i am right about the bug in the file....thats not that far i am askin for help..

as i sad when i prompt F6 i ONLY see 4 drives to add in order to get SATA drives workin (as i told before)

iaStor_ICH8R = "Intel(R) ICH8R/DO/DH SATA RAID Controller (Desktop ICH8R)"
iaAHCI_ICH8R = "Intel(R) ICH8R/DO/DH SATA AHCI Controller (Desktop ICH8R)"
iaStor_ESB2 = "Intel(R) 631xESB/632xESB SATA RAID Controller (Server/Workstation ESB2)"
iaAHCI_ESB2 = "Intel(R) 631xESB/632xESB SATA AHCI Controller (Server/Workstation ESB2)"

BUT the file txtsetup.oem explane that i will show

iaStor_ICH8R = "Intel(R) ICH8R/DO/DH SATA RAID Controller (Desktop ICH8R)"
iaAHCI_ICH8R = "Intel(R) ICH8R/DO/DH SATA AHCI Controller (Desktop ICH8R)"
iaStor_ESB2 = "Intel(R) 631xESB/632xESB SATA RAID Controller (Server/Workstation ESB2)"
iaAHCI_ESB2 = "Intel(R) 631xESB/632xESB SATA AHCI Controller (Server/Workstation ESB2)"
iaStor_ICH7MDH = "Intel(R) 82801GHM SATA RAID Controller (Mobile ICH7MR/DH)"
iaStor_ICH7DH = "Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)"
iaAHCI_ICH7R = "Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)"
iaAHCI_ICH7M = "Intel(R) 82801GBM SATA AHCI Controller (Mobile  ICH7M/DH)"
iaStor_ICH6R = "Intel(R) 82801FR SATA RAID Controller (Desktop ICH6R)"
iaAHCI_ICH6R = "Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R)"
iaAHCI_ICH6M = "Intel(R) 82801FBM SATA AHCI Controller (Mobile  ICH6M)"

i can get a photo in order to get u to understand when and were the problem accours, so what drives do i need?

iaAHCI_ICH7R = "Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)"

this one, but they do not show up.....se explane to me how cant the file be bugged? it shows 4 drives of 11....not good...

the only thing i am askin...but the file in disk start windows xp installaion and tell me if u see all 11 drivers or just the 4 as i see....no more needed, if u see as me 4 drives then we got proof of a bug in the file from dell.

Since I don't have access to a floppy disk or drive at the office, I will have to check when I get home.  In the meantime, I would suggest you look at the alternatives I have offered.  It would be a similar test if you tested the older Dell version and/or the latest Intel version to see if the correct drivers are offfered there - or use nLite to see if you can put the ICH7 drivers into the installation media.

What SP level of XP CD are you using?

I had the same problem, only 4 showed up...then I tried using my arrow keys...and I was able to arrow down through the entire list of drivers.  Now my only problem is that I'm not sure which is the right one!