Unsolved
This post is more than 5 years old
3 Posts
0
132897
Problem with Base system device - PCI bus 1, device 1, function 3 on Latitude D400
Everytime I logon to my Latitude D400, the system is finding new hardware:
Base System device
When trying to install the driver, he doesn't find it.
Can anyone help me out here ?
What's the PCI bus 1, device 1, function 3 device ? What driver does it use ?
Also, when looking at the properties, I got:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The hardware ID's are:
PCI\VEN_104C&DEV_8204&SUBSYS_01391028&REV_00
PCI\VEN_104C&DEV_8204&SUBSYS_01391028
PCI\VEN_104C&DEV_8204&CC_088000
PCI\VEN_104C&DEV_8204&CC_0880
PCI\VEN_104C&DEV_8204&SUBSYS_01391028
PCI\VEN_104C&DEV_8204&CC_088000
PCI\VEN_104C&DEV_8204&CC_0880
Please help!
:smileysad:
shibakid
3 Posts
0
August 10th, 2005 07:00
Found the problem. I identified - in the registery - the base system device as being the "TI UltraMedia Firmware loader device".
Reloaded the TI driver and then the Dell driver set.
Now everything works.
snjackychang
2 Posts
0
August 18th, 2005 05:00
My computer is not Dell, but :manindifferent:I have encountered the same problem. (Toshiba Satellite 2410, in Windows XP system)
My computer find an unknow device as base system device, and I can't find the driver about it.
I don't know how to fix the Registry Editor.
So can you do me a favor, step by step. Thank you for your help. :smileyhappy:
shibakid
3 Posts
0
September 1st, 2005 12:00
snjackychang
2 Posts
0
September 12th, 2005 01:00