Unsolved
This post is more than 5 years old
4 Operator
•
19 Posts
0
14064
Dell 2350 broadband router and P2P
it happens that if i keep Emule and Bitcomet open the router freezes up (i mean i think that the problem may be caused by p2p programs). My laptop gets disconnected from the wireless network and it's not able to see it unless i unplug the router and plug it back in. this kind of problems didn't occur when i was using the 2350 as an AP connected to another router. Now the 2350 connects to a bridge and UPnP is enabled. it seems that the router goes crazy handling too many connections.
how can i keep using filesharing and having my router working properly?
thank you
Phil8400
97 Posts
0
December 15th, 2005 21:00
I have the exact same problem. I only use Bitcomet and my router just locks up after a while.
If I remove the router and directly plug in my cable modem, all is well...so there is nothing wrong with my internet connection.
Let me know if you find out anything.
caravaggio971
4 Operator
4 Operator
•
19 Posts
0
December 16th, 2005 08:00
Phil8400
97 Posts
0
December 16th, 2005 13:00
caravaggio971
4 Operator
4 Operator
•
19 Posts
0
December 16th, 2005 14:00
Phil8400
97 Posts
0
December 16th, 2005 15:00
I'm a little green here.
How do I set it up as a AP other than the setting in the firmware.
Other than that, what must I do to the physical connection and in Windows.
I have two PC's. One is hardwired, and one laptop which uses wireless G. Will they still both be able to use the internet at the same time?
caravaggio971
4 Operator
4 Operator
•
19 Posts
0
December 16th, 2005 15:00