Unsolved
This post is more than 5 years old
5 Posts
0
30239
ETHERNET PORT BROKEN!
Recently, my ethernet port has ceased to work. I have tested it on numerous cables and jacks, but none will read it, or I will get a message that says 'Network cable unplugged'. I took it my school's tech services, and they ran everything they usually do-they said it was my port, not a software problem.
What can I do to fix this?!
What can I do to fix this?!
europa303
4.4K Posts
0
February 4th, 2008 09:00
lee.c.dylan
5 Posts
0
February 4th, 2008 12:00
europa303
4.4K Posts
0
February 4th, 2008 13:00
Speculating you have the standard broadcom gigabit ethernet port you can try downloading and installing the following driver file to the D620. Presuming you can't download to the D620 download to a good computer, then copy the file over with a flash drive or CD and install the file.
Another thing to check is in Device Manager, expand the Network section. Is your device listed there and is anything yellow-flagged?
<ADMIN NOTE: Broken link has been removed / replaced from this post by Dell>
lee.c.dylan
5 Posts
0
February 4th, 2008 21:00
tr4
1.7K Posts
0
February 5th, 2008 02:00
lee.c.dylan
5 Posts
0
February 5th, 2008 02:00
tr4
1.7K Posts
0
February 5th, 2008 02:00
lee.c.dylan
5 Posts
0
February 5th, 2008 03:00